20. Governing bodies and methods of operation
Main governing bodies
Control panel
Control panel *
Gas station of fuel
|
|
Open a stopper of the fuel tank for what rotate it counterclockwise and then remove. |
Again to close a stopper of the fuel tank, put on it a mouth and screw up against the stop rotation clockwise before click (a bayonet lock).
|
|
Handle with fuel with care and follow the corresponding safety regulations. |
Opening of a cover of the hatch of the fuel tank at refusal of automatic system of the central blocking of locks:
- raise a luggage carrier rug on the right;
- remove a covering on the right side;
- wring out a blocking core back.
BMW Touring:
- open a cover of a side covering of a cargo compartment on the right;
- pull the button with a symbol of a fuel column back.
Keys
A. Main keys
|
|
|
B. A key for doors and the lock of ignition
Does not approach locks of a luggage carrier and a ware box.
Production of a new key
Number of a key is set in a stroke - a code on the self-adhesive plate. The request to store in reliable places.
The main key with illumination
|
|
When easing luminous intensity replace the battery, do not allow an electrolyte exit in a nest of the feeding element. - Replacement of the battery - see an illustration. |
|
|
The request to hand over the fulfilled batteries on special assembly points * or on the BMW service. |
At the closed forward doors the luggage carrier, doors and a folding cover of the fuel tank are deblocked and blocked by means of:
- turn of a key in the door lock, or
- movements of the button - a clamp on one of forward doors, or
- turn of a key in the luggage carrier lock, they can be also deblocked by handles of the forward doors which are over armrests.
In order to avoid casual locking of doors it is provided that:
- at an open door of the driver you cannot drown the button - a clamp;
- the button - a clamp of a forward right door puts in action automatic system of uniform blocking of locks only if both forward doors are closed.
At accident the system of uniform blocking of locks is deblocked automatically.
Besides, in this case on separate options of executions the system of the alarm light system and internal illumination of salon join.
It is put in action via the door lock.
The key can be taken out only in vertical position.
At the switched-on anti-theft device the car cannot be opened, extending one of buttons - clamps of doors.
|
|
Not to turn on the anti-theft device if in the car there are passengers since in this case it is impossible to open doors from within. |
Automatic closing of windows is also shifted - the lifted hatch with the electric drive - at the closed door turn a key in the situation corresponding to turning on of the anti-theft device and hold it in this situation. At return of a key to a starting position the movement of windows or the hatch stops.
Emergency use (at defect in an electric chain)
At turn of a key in one of door locks clockwise or against against the stop corresponding door it is blocked or respectively deblocked.
Opening of doors outside - raise the corresponding door handle.
Heating of the lock of a door of the driver * - raise the handle of a door of the driver for several seconds - heating will join. For economy of the electric power time of heating is regulated automatically.
Opening of doors from within - pull on yourself the handle of opening of a door located over an armrest.
|
|
The children who remained in the car can lock doors from within. Therefore do not forget to take out and take with yourself automobile keys to have external access to the car at any time. |
Luggage carrier
Only the main key approaches the lock of a luggage carrier.
Thus unauthorized access to a luggage carrier by transfer of a key In (a key from doors is prevented and the lock of ignition) to strangers - it is useful to you, for example, in hotel or a workshop (it does not belong to cars with the device for a through arrangement of freight).
The luggage carrier at the switched-on anti-theft device can be is opened by the main key, however, after closing has to be blocked again.
Illumination of a luggage carrier
Burns at an open trunk lid.
For fastening of luggage grids * or coupling tapes for fixing of baggage at the bottom of a luggage carrier there are special loops.
For fixing of small baggage use elastic tapes * on a luggage carrier rug.
Gripping dredging at the left near the locking mechanism facilitates movement of an open trunk lid down.
"Children's safety lock" - a stopper of locks of a lobby right and back doors
|
|
Insert the main key into a groove and turn in the direction from salon - now the corresponding door can be open only outside.
Remote control with the infrared transmitter *
|
|
Direct the transmitter to the receiver located under an internal rear-view mirror (the maximum distance of 5 meters), at the same time avoid shading of beams. |
Opening - press the button 1 - the light-emitting diode flashes (4);
- are deblocked automatic system of uniform blocking of locks and the anticreeping system is disconnected;
- the anticreeping alarm system is switched-off;
- internal lighting joins.
Automatic opening - if you want to open windows, and also it is shifted - the lifted hatch, continue to press the button. Through прибл. 2 seconds they will begin to open, the light-emitting diode blinks. If to release the button, then process of opening is interrupted.
Closing - press the button 2
- the light-emitting diode flashes;
- the automatic system of the central blocking of locks works.
Blocking - press the button 3 not later than in 15 seconds after pressing of the button 2
- the light-emitting diode flashes;
- the anticreeping system joins;
- the anticreeping alarm system is activated.
Shutdown of the sensor of the anticreeping alarm system working on change of a tilt angle of the car - after blocking press repeatedly the button 1.
Automatic closing - for closing of windows, and also is shifted - the lifted hatch press the button 2. Through прибл. 2 seconds they will start moving, the light-emitting diode blinks. If to release the button, then process of closing will at once be interrupted.
|
|
If you incidentally released the button 2, then to continue closing press the button once again, release, press again and hold in this situation. |
Main key
The key in the infrared transmitter is the main key. All functions of remote control can be duplicated by usual keys.
- replace batteries if the light-emitting diode when pressing one of buttons does not flash and locks do not work.
|
|
Raise a cover for dredging by means of the screw-driver (shooter). |
Unscrew the screw (shooter) and uncover.
The type of the battery and its situation at installation are represented at the bottom of the corresponding nest.
|
|
Use only batteries of the specified type. |
Restoration of function of the transmitter
After replacement of the battery it is necessary to restore function of remote control of the transmitter (it is not required if it proceeded less than one minute and at this time any of buttons was not pressed). The same needs to be made in case you received the new transmitter (for example, when replacing defective):
- close the driver's door, turn a key in the ignition lock for max. 5 seconds in situation 1 and return in situation 0 again;
- press the button 1 (see an illustration) on the transmitter and hold it in this situation. Press three times in a row within 10 seconds the button 2; at the same time do not release the button 1.
- release the button 1, the light-emitting diode will slowly blink within max. 10 seconds;
- bring the transmitter to the receiver located under an internal rear-view mirror (whenever possible, close, as much as possible on 15 cm) and press one of кнопо;
- the automatic system of uniform blocking of locks works — there is a blocking and instant unblocking of locks that demonstrates that function of the transmitter was successfully restored.
If light-emitting diodes do not blink and the automatic system of uniform blocking of locks does not work, then all process needs to be repeated again.
If you have additional transmitters for your car, then you within 30 seconds have to restore their functions (in total to four transmitters). At the same time, the lock of a shaft of a steering wheel has to remain untouched.
If one of transmitters failed, then you can get spare on the BMW service.
|
|
Just as production of the copy of each key is possible, in the same way the signal of the infrared transmitter can be copied. The signal code which is automatically changing after each use, and also a possibility of repeated restoration of function provide the maximum guarantee against abuses. Nevertheless, do not allow strangers to use the infrared transmitter. |
Seats *
Regulation of provision of seats in the longitudinal direction
|
|
Pull the lever (1), move a seat in required position. |
Having released the lever, pay attention to that the clamp worked.
Regulation of an inclination of a seat (only driver's seat)
Pull the lever (2), establish the necessary height.
Sports seat *
Additional regulation of a femoral support with the help a makhovichka, the seat located in front sideways on a frame.
Regulation of provision of a seatback
|
|
Pull the lever (1), increasing or reducing load of a seatback, establish it in the necessary situation. |
Regulation of provision of a seat on height
Pull the lever (2), increasing or reducing load of a seat, establish it in the necessary situation.
|
|
During the movement do not rearrange the driver's seat. At sharp movement of a seat it is possible to lose control over the car that will lead to accident. The passenger sitting near the driver during the movement should not throw back completely a seatback back. |
|
|
For unloading of intervertebral disks sit down more deeply in a seat and all back completely lean on a seatback. At ideal landing the head forms one straight line with a backbone. |
At trips on a long distance for unloading of muscles of a back it is possible to cast away a seatback more than usual. However, at the same time an opportunity to rotate a wheel slightly bent hands has to remain.
Head restraints forward and back *
Head restraints are regulated on height by their pulling upward or an utaplivaniye down.
|
|
Turning head restraints you can regulate their inclination. |
|
|
At accident head restraints reduce danger of damage of cervical department of a backbone. The middle of a head restraint has to be приблизительн it to height of ears. |
Automatic control of provision of front seats *
Sports seat *
Additional regulation of a femoral support by means of movement of the ravnoplechy rychazhk located on a frame from the outer side of a seat (the switch A on an illustration is lower).
Storing of provisions of seats, mirrors and steering wheel *
|
|
Programming and call of three various provisions of a seat, external rear-view mirrors and the helmsman колеса* are possible. |
Programming - starting with the provision of a key in the lock of ignition 1:
- establish the desirable provision of a seat, external rear-view mirrors and a steering wheel;
- press the button of memory MEMORY: the control lamp signals readiness of system;
- press the button 1, 2 or 3, the control lamp will go out.
Call
The door of the driver is open or closed, included automatic system of illumination of salon or the key in the lock of ignition is turned in situation 1:
- press shortly the button 1, 2, or 3.
If you press the switch of regulation of a seat or mirror or the button of memory, then process of regulation will at once be interrupted.
The door of the driver is closed, and the key or is extended or turned in the ignition lock in situation 0 or 2:
- hold the button 1, 2 or 3 pressed until regulation process ends.
Inclination of the right mirror
Install the mirror switch in situation "Driver's Mirror":
At inclusion of a backing or moving of a control lever by the automatic transmission to situation R the mirror changes the situation so that for example at the parking, the lower near zone of the car (a curbstone edge) was in the field of vision.
You can also switch off this automatic system - for this purpose install the switch of a mirror in situation "Passenger's Mirror".
Support of lumbar department of a backbone of a seat of the driver *
|
|
It is regulated as required by means of movement of the ravnoplechy rychazhk located on a frame from the inside of a seat. |
By means of this device the seatback contour can change thanks to what the additional support for lumbar department of a backbone is created.
The top crest of a podvzdoshny bone and backbone are propped up, i.e. maintenance of a straight line and the weakened bearing when sitting is provided.
Electric drive of back head restraints *
|
|
If the passenger on a back seat is fastened by a seat belt, then the corresponding head restraint automatically moves forward. For regulation of height use a ravnoplechy rychazhok. |
Change of provision of a column of a steering wheel *
|
|
Do not change the provision of a column of a steering wheel during the movement - there is a danger of accident. |
Automatic change of provision of a steering wheel *
The provision of a steering wheel can be regulated in the longitudinal direction and on height *, according to the direction of the movement of the lever.
|
|
Do not change the provision of a steering wheel during the movement - there is a danger of accident. |
Input of a position of a steering wheel in memory - see Storing of provisions of seats, mirrors and the helmsman колеса*.
Automatic change of provision of a steering wheel * (only together with regulation on height)
It was more convenient to you to take the wheel and to go out of the car, the steering wheel automatically moves to the top position if:
- the key in the lock of ignition is turned in situation 0;
- the key in the lock of ignition is in situation 1 and the driver's door opens;
- the key in the lock of ignition is in situation 2, the parking brake is tightened and the driver's door opens.
The steering wheel moves to the position recorded in memory if:
- the key in the lock of ignition is in situation 2 and at an open door of the driver the parking brake is released;
- the key in the lock of ignition is in situation 2, the parking brake is tightened and the door of the driver is closed.
Sound signal
|
|
Press one of keys. |
The device for a through arrangement of freight *
The back seat is divided into two parts concerning 1/3 to 2/3. For loading of large-size objects of a pillow and a back (backs) of seats can lean back.
Pull a pillow of a seat for a loop and establish vertically, if necessary, move a little forward a front seat.
|
|
The back of a back seat is automatically deblocked and it can be cast away forward. |
|
|
External angular parts of basic pillows are not mobile. |
Before it extend breakthrough head restraints *, having inclined for this purpose if it is necessary, a seat.
The head restraint can be postponed in space between the back which is cast away forward and a door.
|
|
If you unintentionally blocked a seatback, then press the lever (shooter) - having released the lever you deblock a back. |
If necessary, pillows of seats can be dismantled. For this purpose establish them vertically, squeeze unblocking rychazhka and extend upward. At installation arrive in the return sequence.
For fixing of a head restraint with the electric drive at repeated installation press it with a force.
|
|
After dismantle of a pillow of a seat turn upward an arm (shooter) and record a red latch of a seatback in an arm finger. |
|
|
Before installation of a pillow of a seat cast away an arm down! |
The request to watch that freight was reliably fixed and could not move during the movement; during the braking and maneuvers there should not be a danger to passengers.
At an unrecorded seatback the seat belt is not extended.
BMW Touring
Folding back of a back seat
The back of a back seat is divided into two parts concerning 1/3 to 2/3. For tilting press the button (from above) and lay down completely a back.
For a reset press the button again.
Protective blinds of a cargo compartment
Extend blinds and record them behind.
The cartridge with blinds can be dismantled. For this purpose press the buttons on both sides and take out the cartridge.
For repeated installation just press the cartridge into fastenings.
Dividing grid of a cargo compartment *
Extend a grid from a most top part of a seatback, move apart a fixing level on full width and hang up it on holders.
At will, instead of bigger you can extend a smaller part of a grid and hang up on a fixing level.
Holders of fixing levels are available both for cast away, and for being in vertical position of backs of back seats.
Folding covers at the bottom of a cargo compartment
Opening - press behind deepening for capture and cast away upward a cover.
Under a forward folding cover are: an automobile jack, a key for bolts of fastening of wheels, a persistent wedge, a head for "sekretok" of wheels *, a six-sided key for a protective cover of bolts of fastening of wheels *, and also a spherical head for a towing ustroystva*.
Under a back folding cover are: a spare wheel and boxing with compartments.
The side covering of a cargo compartment of a body - opens pressing the unblocking button in the left top corner of a covering.
Additional socket *
In the left back corner of a cargo compartment under a covering.
It can be used as the socket for electric devices by power to прибл. 280 W at a voltage of 12 V.
Do not damage a cartridge - insert only the suitable plug!
Seat belts
|
|
Be fastened by seat belts at each trip. |
The seat belt lock, when fastening, has to work with obviously heard click.
Otstegivaniye of a belt - press the red button in the lock and, slightly directing a belt, give it to the automatic involving device.
Fasten a seat belt without twisting and pull through hips and a shoulder. At the same time, do not impose it on rigid or fragile objects in clothes pockets. The seat belt adapts to each movement of a body.
The belt has to adjoin to a body whenever possible densely; therefore before being fastened, take off clothes from especially thick and volume material, and also do not throw back back too far a seatback.
|
|
The belt has to adjoin constantly to a body whenever possible densely (the inclination of a seatback has to be small) for the following reasons. At frontal collisions the zone strap of a belt can slide off hips and wound the lower part live and that. The holding action of belts because of the increased side play is late. Pregnant women also have to be fastened always by a seat belt and at the same time watch that the zone strap adjoined below to hips, but was not on the lower part of a stomach. |
Individual adjustment of a seat belt is carried out by means of change of height of its top fastening.
One seat belt it is possible to fasten only one person.
The seat belt should not be imposed on a neck, be jammed or rub about sharp edges.
|
|
It is not allowed to put babies and juvenile children on knees during the movement. |
For children up to 12 years use the corresponding security systems.
Safety of babies up to 9 months can be ensured by use of the special children's cradles established against the car course on forward or back seats and fastened by regular seat belts.
For children aged from nine months up to three years and from three to six years you can use the VARIO system of BMW, established in the direction of travel with use of a regular seat belt.
It is possible to use also the sitting for children aged from two up to twelve years consisting of three parts - baskets for a seat, a back and the catching device.
This seat fastens in the direction of travel with use of a regular seat belt.
Using children's security systems, surely observe instructions of manufacturers. Necessary points of fastening at serial execution are in a back part of salon behind front seats.
It is forbidden to enter any constructional changes into the system of seat belts or children's security systems.
If system of seat belts, including an inertial natyazhitel (is in a development stage), and also a children's security system * were damaged or underwent critical loading owing to accident, they need to be replaced new, and also to check fastenings of belts. Charge repair and check to experts on the BMW service.
At the involved inertial natyazhitel of a belt between the lock and a casing there is a gap in 20 mm.
The seat belt is blocked at:
- sharp pulling of a belt;
- sharp braking or acceleration;
- movement on a curve;
- strong inclination of the car.
Safety cushion - the buffer Airbag system *
The buffer Airbag system protects the driver at frontal collision.
At blow the safety cushion will amortize sharp movement of the case of the driver forward and protects the top part of a trunk.
The buffer Airbag system works, since precisely certain force of frontal collision.
|
|
On an illustration the zone of the direction of blow in which there is an operation of system is represented. |
At small accidents in case the car turned over, side or back blows your safety is ensured only by a seat belt.
|
|
Existence in the car of a safety cushion does not exempt from a duty to be fastened by belts. |
Light indication of Airbag in a combination of devices
The indicator shows that the system can use, from the moment of turn of the ignition key in situation 1.
The system is ready to work:
- the inscription Airbag shines during прибл. 6 seconds and then again die away.
The system is faulty:
- the inscription does not light up;
- the inscription shines during прибл. 6 seconds, die away for a short time and light up again;
- the inscription blinks during the movement within 5 minutes and then shines continuously.
In this case there is a danger that the system at accident will not work. At once request on the BMW service check.
Operation of system
The safety cushion which is under a soft decorative overlay of a wheel is filled with air, breaks off the place of the programmed destruction and is inflated over a steering wheel.
All process lasts only several fraction of a second.
At operation of a safety cushion the driver does not feel feeling of blow - on the contrary - cotton, bystry filling and an air outlet, owing to short time of reaction, are lost in vanity of an emergency event.
|
|
The driver has to take seat on a seat at the corresponding distance from a steering wheel since the pillow is filled with air with a considerable speed and force. During the movement the head and the top part of a trunk should be held whenever possible further from a steering wheel. |
At operation of the Airbag system working gas and a small amount of smoky gas is released. These gases are not unhealthy and are not a fire sign in the car.
Safety measures
It is forbidden to make any constructional changes to an electrical wiring and to separate components of the device.
It concerns as well a decorative overlay of a steering wheel which should not be stuck, fitted anew, change or be processed in any way, and also the most steering wheel which dismantle is forbidden.
Works on repair of the Airbag system can be performed only on the BMW service.
The works which are carried out not properly can lead to refusal or casual operation of system and, as a result of they are to wounds.
At rejection of the generator of an inflatable safety cushion surely follow the safety rules made by BMW which it is possible to study on any BMW service.
For ensuring reliable functioning of system by all means observe terms test, tests, specified on the self-adhesive plate in a ware box.
Rear-view mirrors
External rear-view mirrors with the electric drive
|
|
Change of situation by means of switching of the corresponding directing lever. |
Electric heating *
Heating of both mirrors is carried out automatically at turn of a key in the ignition lock in situation 2.
Right external rear-view mirror
Regulation by means of the directing lever after pressing of the switch.
|
|
This mirror convex. The objects seen in a mirror are closer, than it seems in a mirror. Therefore determination approximately of distance to the vehicle moving behind perhaps is only conditional. It concerns also a convex part of a spherical mirror of the increased visibility. |
Spherical mirror of the increased visibility *
Spherical convex external part of a mirror creates bigger, in comparison with an internal part of a mirror, slightly distorted field of the review.
As a result of it the rearview extends and the so-called "dead zone" is excluded.
Change of provision of a mirror is manually carried out by pressing edges of mirror glass.
Internal rear-view mirror
|
|
For reduction of the blinding action behind at night trips change a tilt angle a cross over rychazhok. |
Antisolar peaks
Can turn towards side glass. Cosmetic mirrors have mobile blinds.
Illumination of a cosmetic mirror *
Cast away an antisolar peak down and remove a blind aside.
Internal rear-view mirror with automatic change of a tilt angle *
|
|
For correct functioning of a mirror photo cells have to be kept clean and not be blocked. |
Internal rear-view mirror with mechanical change of a tilt angle *
The rotary button in situation 0 - an initial position.
The rotary button in situation 1 - the mirror is inclined.
Switch of ignition and starter/lock of a shaft of a steering wheel
|
|
0 — Steering is blocked.
The key is inserted or taken out only in this situation. Consumers of current it can be disconnected, however, part of them is included, for example, parking and marker lights, internal lighting, system of the alarm light system, the electric drive of change of provision of seats and the lighter.
Blocking
Extend a key and slightly turn a steering wheel before operation of a clamp.
Unblocking
Slightly rotating a steering wheel to the right-to the left, turn a key.
1 — Steering is deblocked
- In this situation an additional number of consumers, for example, the radio receiver and the on-board computer can work.
2 — Ignition is included by BMW 525tds - preheat;
- All consumers of current are connected.
|
|
Condition of ensuring comfort which gives you electric equipment is well charged rechargeable battery. Idling the rechargeable battery is charged only slightly. Therefore we recommend if it is not absolutely necessary, at the movement in the city, a column it is, etc. temporary to switch-off the equipment with high consumption of current (for example, heating of a seat, back glass). For saving information in memory of separate devices, small current continuously comes to electric system. This circumstance has to be considered especially when the car is put on the long parking more than four weeks. Previously, to avoid a discharge of the rechargeable battery, disconnect it from onboard network. |
3 — Inclusion of a starter.
Do not press an accelerator pedal at start.
On the cars equipped with the automatic transmission, launch of the engine is possible only at establishment of the lever of switching in the provision of P or N.
Important information
|
|
We warn - never start the engine in the enclosed space. The fulfilled gases contain not having color and a smell, poisonous carbon monoxide. Inhalation of the fulfilled gases is unhealthy, can cause unconsciousness and lead to death. Never take out a key during the movement of the car as in this case the lock of a shaft of a steering wheel can work. Leaving the car surely take out a key from the lock of ignition and block the lock of a shaft of a steering wheel. |
Light switch
|
|
The 1st step — dimensional light The 2nd step — passing beam |
If ignition is switched off at the turned-on passing beam, only dimensional light continues to burn.
Cars without control and alarm display - after turn of the ignition key in situation 0 within several seconds the buzzer for a reminder that the light is not turned off is distributed.
The buzzer becomes silent if to press the button of zeroing of the daily counter of the passable way.
Cars with the control and alarm display - the reminder is made by indication on the control and alarm display.
Illumination of a guard of devices
Regulation of lighting is carried out by rotation of a roller.
Passing beam for the movement during daylight hours *
If it is required, then it is possible to leave the switch of light at the second step; at switching off of ignition passing beam and dimensional light will automatically go out.
On some models, depending on execution option, passing beam for the movement is turned on automatically at turn of a key in the ignition lock in situation 2 in the afternoon even if the switch of light is in a position 0.
The combined switch of indexes of turn/light of headlights
|
|
1 — Driving beam (a blue control lamp) 2 — the Blinking driving beam 3 — the Index of turn (a green control lamp and a periodic sound signal of the relay of the breaker of indexes of turn) |
The accelerated blinkings of a lamp and clicks of the breaker demonstrates that one of lamps of indexes of turn fused.
Unstable position of the lever of indexes of turn
Do not fix the switch lever at the beginning of maneuver or change of a number of the movement. The lever comes back to a starting position automatically.
Parking fires of the left and right board
|
|
To squeeze out the lever for the provision of inclusion of the corresponding index of turn down. |
Lever of switching of screen wipers and windscreen washers
Purification of glasses of headlights * or fog lights
At every fifth course of a brush of a screen wiper at inclusion of the automatic mode or automatic mode of hard work of cleaners and washers * also headlights are at the same time cleared if at the same time marker lights are included.
1 — the Interval operating mode of cleaners
The time interval is regulated automatically, depending on the speed of the movement.
If there is a possibility of programming of an interval *, then for programming of time switch the lever shortly from situation 0 to situation 1.
Time before repeated switching (from situation 0 in situation 1) - is also the programmed time interval (max. 20 seconds, at the stopped car increase twice).
To extinguish it, rearrange the lever in situation 2 or switch off the engine.
2 — the First speed of work of cleaners
On the motionless car switching to an interval operating mode happens automatically.
5 — the Automatic operating mode of cleaners and washers
Detergent is sprayed on a windshield and for a while the cleaner joins (if to wring out the lever in this situation only for a moment, then only the washer will work).
6 — the Automatic mode of hard work of cleaners and washers
Similar to point 5, however, in addition before it on a windshield especially strong detergent is sprayed.
Heating snuffled windscreen washers *
Joins automatically at turn of a key in the ignition lock in situation 2.
|
|
Use windscreen washers only if freezing of detergent on a windshield since otherwise visibility sharply decreases is excluded. Do not use windscreen washers at an empty tank - it is possible to damage the pump. Separate the frozen brushes of a screen wiper from glass at inclusion of a screen wiper not to damage system. |
BMW Touring
1 — the Interval operating mode of a cleaner of back glass
2 — the Automatic operating mode of a cleaner and a washer of back glass (inclusion by a push)
Counter of the general run
Registers total of the passable kilometers.
The run measuring instrument from the moment of dumping
Registers a run to 999.9 km.
Zeroing (from the moment of turn of a key in the ignition lock in situation 1). Press the button.
Reading of indications of the counter of the general run and the measuring instrument is possible at the taken-out key or its turn in the lock in situation 0.
For this purpose press the button of zeroing, for some time the corresponding indication will appear.
Tachometer (Main scale)
Do not allow increase in frequency of rotation of a shaft of the engine up to size at which the arrow comes into a red zone.
In this range, for the purpose of protection of the engine, fuel supply is interrupted that has an effect interruptions in its work.
Ekonometr (Lower scale)
Points fuel consumption in liters to 100 km., since speed прибл. 20 km/h.
This device allows to watch economy mode of driving.
Index of level of fuel
The control lamp of a reserve lights up when in a tank there are about 8 more liters of fuel.
For serviceability control the lamp at inclusion of ignition lights up for a short time.
Index of temperature of cooling liquid
Arrow in the blue field - the engine cold. The movement with an average frequency of rotation of a bent shaft of the engine and moderate speed is recommended.
The arrow in the red field, lights up a control lamp, on the control and alarm display * the inscription "Kuhlwassertemp" ("Temperature of cooling liquid") - an engine overheat appears. Immediately switch off and cool the engine. An arrow between color fields - normal working temperature. At the high external temperature or strong load of the engine of the shooter can approach the red field. Control of level of cooling liquid - see the Head Routine maintenance of the car.
Indication of intervals of maintenance
|
|
Green fields - the number of the shining fields are less, the term of the next maintenance of your car is closer.
The yellow field together with OILSERVICE indication (OIL REPLACEMENT) or INSPECTION (MAINTENANCE) - lights up at approach of term of maintenance and shines continuously.
The red field - the carrying out deadline THAT expired.
Emergence of a symbol of hours together with indication of INSPECTION (MAINTENANCE) - indicates the next term of replacement of brake fluid.
|
|
Parking time during which the rechargeable battery is disconnected is not considered by indication of intervals of maintenance. |
For the purpose of observance of a biennial interval of replacement of brake fluid, this period of time has to be considered surely, i.e. replacement of brake fluid needs to be made respectively before emergence of a symbol of hours.
Indication dies away after launch of the engine. After carrying out maintenance on the BMW service indication is established by experts in a starting position.
In this respect you will find more detailed information in the service book.
Control lamps
Indexes of the left/right turn
|
|
Light up periodically at inclusion of the index of turn. |
Driving beam
|
|
Burns at the turned-on driving beam or giving of a distant light signal. |
Index of turn of the trailer *
|
|
Blinks along with the index of turn if the car is operated with the trailer. |
Wear of overlays of brake shoes
|
|
Lights up at inclusion of a starter and dies away after launch of the engine.
Lights up during the movement - replace brake shoes whenever possible quicker. |
|
|
Use only company brake slips allowed by BMW. |
Parking brake
|
|
Dies away after start of the engine. Lights up when tightening the parking brake. |
Hydraulic drive of the brake system
|
|
Dies away after start of the engine.
Lights up during the movement - the low level of brake fluid. |
Anti-blocking system of brakes (ABS) *
|
|
Dies away after launch of the engine.
Lights up during the movement - the ABS system is disconnected owing to malfunction. Normal braking is provided completely. |
The request to fasten seat belts *
|
|
The combination with a sound signal * or indication on a control and alarm displee* is possible.
Lights up at inclusion of ignition and then dies away (sometimes dies away only after fastening of seat belts, depending on execution). |
Oil pressure in lubricant system of the engine
|
|
Dies away after start of the engine. The blinking is allowed idling at the heated engine, but has to go out at increase in turns. Lights up during the movement, on the control and alarm display indication of "Oildruk Motor" - appears ("Oil pressure in the engine").
|
|
|
ASC T = System of stabilization of stability and adjustment traction усилия*. |
|
|
b) BMW 525iX: Anti-blocking system with electronic regulation. |
Point and) - is more detailed - the item ASC T - System of stabilization of stability and adjustment traction усилия*.
Point) - a control lamp blinks - the anti-blocking system is customized according to loading and road conditions.
The control lamp shines
The system is defective, but also without effect of anti-blocking the car can normally be operated. For, carrying out repair address on the BMW service.
Insignificant, temporary malfunctions are eliminated with the control system at repeated launch of the engine.
Charge of the rechargeable battery
|
|
Dies away after launch of the engine. Lights up during the movement - defective maple a belt of the drive of the generator or malfunction in a charge chain. The rechargeable battery is not charged any more. |
|
|
In case of a defective maple belt operation of the water pump therefore there is a danger of an overheat and damage of the engine stops. |
Address on the BMW service.
Besides, at a defective maple belt it is necessary to make bigger effort at rotation of a steering wheel.
Fog lights *
|
|
Shines at the included fog lights. |
Back foggy fires
|
|
Shines at the included foggy fires. |
BMW 525tds
Control lamp of the button of cold start
|
|
Preheat
|
|
For start of the engine address the item BMW 525tds. |
Regulation of electronic system of injection
|
|
Lights up for several seconds at turn of a key in the ignition lock in situation 2 (warming up).
If lights up during the movement - in system of injection malfunction is found. Continue the movement to the next HUNDRED in the mode of limited power. |
Fog lights *
|
|
At the switched-off fog lights the green control lamp in a combination of devices shines. |
Back foggy fires
At the included back foggy lamps the yellow control lamp on the control panel shines.
Heating of back glass
|
|
Press the button - work of a control lamp demonstrates that there is an intensive heating of back glass (bystry thawing). |
The cars equipped with the conditioner or the automatic air conditioning system:
- if the control lamp dies away, then the system switches automatically to economy mode of work and after прибл. 20 minutes are switched off.
By repeated pressing of the button - the cycle (including bystry thawing) is repeated.
Switching off of o press the button at the shining control lamp.
After each launch of the engine heating of back glass needs to be included again.
Alarm light system
|
|
The button at the switched-on alarm system lights up the red blinking light.
At the included dimensions the press button is highlighted. |
Self-diagnostics display *
|
|
Messages on malfunctions appear in the form of the text - instructions and preventions, the buzzer sound at the same time is distributed. Messages on malfunctions have three degrees of importance |
|
Degree of importance 1 |
Value/help |
|
Bremsflussigkeit Brake fluid |
Level of liquid fell to a minimum. Add at the first opportunity - see the Head Routine maintenance of the car. |
|
Oildruck Motor Oil pressure in the engine |
Charge establishment of the reason of loss of brake fluid and its elimination to experts of the BMW service. Too low. Immediately stop and switch off the engine. Address diagnostics of malfunctions of the Head the Brake system. |
|
Handbremse losen To release the emergency brake |
Appears after a start of motion. |
|
Kein Bremslicht Stop - signals do not function |
Lamps or safety locks fused, replace lamps or safety locks (The head Sistema of onboard electric equipment). |
|
Bremsli Elektrik The electrician of feet - signals |
Stop - signals do not burn - safety locks or an electric chain are faulty; replace safety locks (The head Sistema of onboard electric equipment) or address on the BMW service. |
|
Niveauregelung * Regulation of a road gleam * |
The car is overloaded or the system of regulation of a road gleam is defective; reduce loading or address on the BMW service (max. speed: 170 km/h). |
|
|
* Alternately with indication of "Niveauregelung" ("Regulation of a road gleam") the prevention "max appears. 170 km/h" ("Max. 170 km/h") in case speed is exceeded. The prevention will go out at reduction of speed. |
|
SPEED LIMIT * |
SPEED LIMIT. Indication appears at excess to the ordered pra of efficient speed. Observe traffic regulations. |
These malfunctions are immediately signaled by a buzzer and the blinking index sign (1).
At simultaneous emergence of several malfunctions they are displayed consistently.
Messages remain until malfunctions are eliminated and cannot be dropped by a key of the display of self-diagnostics (2).
|
Degree of importance 2
|
Value/help |
|
Getriebeprogramm * Program of the transmission * |
The automatic transmission - malfunction of electronic system - see below, the item. Control lamp electronic, systems of automatic transmission (3). |
|
Bremsbelage Overlays of brake shoes |
Are worn-out (address the Head the Brake system). |
|
Waschwasserstand Liquid level in a washer reservoir |
Fell below norm, add at the first opportunity (address the Head Routine maintenance of the car). |
|
1 Bremslicht 1 feet - a signal
|
One lamp fused (address the Head Sistema of onboard electric equipment).
|
|
Abblendlicht Passing beam |
The lamp or safety lock or electric chain fused it is faulty (address the Head Sistema of onboard electric equipment). |
|
Kennzeichlicht Lamp of illumination of registration plate Anhangerkicht * Trailer lamps * |
The safety lock of lighting of the trailer or electric chain are faulty; replace a safety lock (The head Sistema of onboard electric equipment). |
The message appears at turn of a key in the ignition lock in situation 2 (if there are malfunctions of degree of importance 1, then they appear automatically). After messages on the display die away, there are signs of existence of information. If there is a plus (3) - cause them pressing a key 2.
|
|
By means of a self-diagnostics display key the messages entered into memory can be extinguished until their automatic deleting or, on the contrary, information of the message specified by a sign of existence can be caused respectively from memory. |
|
Degree of importance 3 |
Value/help |
||
|
Oelstand Motor * Oil level |
Oil level in the engine went down to a minimum. Check oil level, add as soon as possible (for example, when filling) - see Glavutekushchy service of the car. |
||
|
Kuhlwasserstand Level of cooling liquid |
Level of cooling liquid is lower than norm. Add at the first opportunity - see the Head Routine maintenance of the car. |
||
|
Sensor Oelstand * Oil level sensor * |
The sensor of level of oil is faulty. Address the Head's materials Routine maintenance of the car.
|
||
|
Check-Control Self-diagnostics display |
Malfunction of electronics, various messages thereof are not displayed. Ask for the help on the BMW service as soon as possible. |
||
|
Licht an? * The light is turned on? * |
The message upon termination of the movement (after opening of a door of the driver). |
||
|
Bitte angurten * Fasten belts * |
This message can appear along with a signal of a control lamp * or sound сигналом*. |
The message appears for the first time only upon termination of a trip at turn of a key in the ignition lock in situation 0 (at several messages there is a consecutive indication - messages of degree of importance 3 follow messages of degree of importance 2 and 1). At the same time, by means of a display key, the message still can be caused approximately within three minutes after the end of the movement, even at the key which is taken out from the ignition lock and the gone-out indication. The message appears also before a trip at turn of a key in the ignition lock in situation 2. The text dies away through short time (with a start of motion) and the sign of existence of information is not displayed. New messages appear only after turn of a key in situation 0. At emergence of a plus - cause the available messages, having pressed a self-diagnostics display key.
General information: If there is an inscription "Betriebsanleitung" ("Operation manual"), it is necessary to follow the instructions given above.
The inscription "Betriebsanleitung" can be extinguished, having pressed a self-diagnostics display key.
Check of serviceability of the display (in the absence of messages) - having turned a key in the ignition lock in situation 2, press a key 2 - there has to be a message of CHECK CONTROL OK (the DISPLAY of SELF-DIAGNOSTICS is SERVICEABLE).
EDC - electronic adjustment of rigidity of shock-absorbers *
|
|
To — the Comfortable mode of the movement S — the Sports mode of the movement |
Switching from one mode to another perhaps at any time at the movement if the key is in the ignition lock in situation 2.
The chosen mode (comfortable or sports) remains at any speed and loading.
Shoulders of the switch are highlighted. At malfunction the control lamp dies away. For repair address on the BMW service as soon as possible.
ASC T - System of stabilization of stability and adjustment of traction effort *
|
|
The system prevents pro-slipping of driving wheels under adverse conditions (ice) and provides, thanks to it, their coupling, optimum from the point of view of laws of physics, with a roadbed. |
The system joins with launch of the engine
The control lamp in a combination of devices on a guard dies away right after inclusion of ignition.
Shutdown of system - press the button, the control lamp lights up.
Repeated inclusion of system - again press the button, the control lamp dies away.
The control lamp blinks - system in the control mode under traffic conditions.
The control lamp does not die away after launch of the engine or flashes during the movement - the system is faulty; however, the car can be operated also without the ASC T system in the usual mode. For repair of the ASC T system address on the BMW service.
Parking brake
|
|
The lever of the parking brake is independently fixed when tightening. At the same time the control lamp "Р" in a combination of devices lights up. |
Release of the parking brake - slightly pull the lever upward, press the button and release the lever.
The parking brake influences back wheels. If during the movement in it there is a need, then do not tighten the lever too strongly, in order to avoid excessively strong braking which can cause blocking of a back axis and the breaking of a back of a body connected with it.
|
|
If the lever of the parking brake is tightened, then lamps of stoplights do not burn. |
Transmission
|
|
If on the fifth transfer the frequency of turns of the engine - 5000 rpm - on cars with the internal combustion engine with compulsory ignition of working mix is exceeded and 3800 rpm - on cars with the diesel engine - that switching to the fourth step of the transmission it is not admissible - there is a danger of damage of the engine. |
Reverse gear
At the stopped car and movement of the lever of gear shifting it is necessary to overcome small resistance to the left.
Backing headlight
Lights up at the included ignition and the switched-on reverse gear.
|
|
On rises do not practice car snubbing due to incomplete inclusion of coupling; use the parking brake. Incomplete inclusion of coupling causes its increased wear. |
Automatic transmission *
|
|
Keep in mind:
Launch of the engine is possible only in position of the lever of P or N.
From below on the control lever handle the blocking button which prevents wrong switching of a control lever is the automatic transmission. For unblocking of the lever press the button.
After establishment of a control lever in a position of the movement before pressing an accelerator pedal, at first wait for the moment of inclusion of an automatic box!
On the minimum turns (idling turns) the car at the included position of the movement moves also in case you do not touch an accelerator pedal.
In case of wrong switching on high turns in a position N, immediately release an accelerator pedal. Only after zty establish a control lever in a necessary position.
|
|
Before leaving the car at, the working engine, establish a control lever by the automatic transmission in a position of P or N and cock the lever of the parking brake! |
Р — the Parking
To include only at the motionless car. Driving wheels are blocked.
R — the Backing
To include only at the motionless car and turns of idling.
N — the Neutral position (Idling)
To include only at long pauses in the movement, and also at danger of a drift of the car.
D — Drive — the Movement (A position of automatic gear shifting)
Joins in the usual mode for the movement on all transfers.
4 — Direct transfer
You put the lever in this position if in a position B need of frequent transition from the 5th to the 4th transfer is obvious. In this case the 5th transfer does not join.
3 and 2 * — the Lowering step with the increased transfer number, snubbing step.
These positions should be included in mountains, and also on long rises and descents. Such mode gives the chance to optimum use engine capacity.
At the same time the effect of braking by the engine amplifies and undesirable switching to higher transfer is avoided.
These positions can be involved at any speed. The transmission switches to the lowest transfer only when the corresponding low speed is reached.
* The first transfer joins automatically. This position, thanks to system of coordination, is especially good for operation of the car with the trailer.
Ultraboundary pressing a pedal of an accelerator ("Kick-Down")
The pedal of an accelerator can be squeezed out for a point of maximum "gas". At the same time it is necessary to overcome the increased resistance on the pedal course.
The transmission switches in this case to a low gear for the accelerated dispersal. The subsequent switching to an overgear happens at higher turns.
Modes of the movement
Е (Economy) — economy mode
For the movement with the smallest fuel consumption; is a starting position after each start.
S (Sport) — the sports mode
For the sports movement. The transmission switches to an overgear later that gives the chance completely to use a car power reserve.
* (Winter) — the winter mode
For winter traffic conditions. In transfers from the 2nd to the 5th join in the most optimum way for the movement in winter conditions in positions.
In positions 4 3 and 2 the chosen transfer does not change. It means that the car starts at this speed and at dispersal switching to a low gear does not happen.
On rises or at the movement with the trailer there is, for example, favorable a movement with installation of the lever of the automatic transmission in a position 2 or in the winter on the slippery road - in a position 4 what gives the chance of smooth dispersal and prevents undesirable switching of speeds.
Control lamp electronic, systems of automatic transmission (3)
- if the lamp lights up during the movement or
- on the control and alarm display there is a message of "Getriebeprogrfmm" ("Program schedule"), it testifies to malfunction of electronic system or the transmission.
In this case the lever of the automatic transmission can be still installed in all positions, however, the car can move to advance positions only on the 4th or 5th transfer.
In this case avoid high loadings and address on the next BMW service.
|
|
If the control lamp lights up or there is a message on refusal of electronic system, the further movement on the car is forbidden and it needs to be repaired on the BMW service. |
|
|
Never you perform any works in podkapotny space at the included position of the movement. Do not leave children in the car unguarded. |
Operations procedure at towage for the purpose of launch of the engine, an otbuksirovaniye and launch of the engine by means of the auxiliary accumulator - address the Head Avtomobili of the BMW 5-brand of a series and the Section Start of the Engine from an auxiliary source.
Heating and ventilation
|
|
1-3 — Levers of distribution of the given air
Smooth regulation of distribution of heated air.
- The lever on the left - it is closed;
- The lever to the right - it is opened completely.
1 — the Lever of distribution of the air given on glasses
The air arriving via deflectors goes to a windshield and forward side glasses.
2 — the Lever of distribution of the air given in the middle
Air supply is regulated by turn of deflectors in the middle of the dashboard, in forward doors, and also on the top party of the dashboard.
3 — the Lever of distribution of the air given to legs
Air arrives via the deflectors located in a forward and back part of space for legs. On cars without microfilter - these nozzles have to be open for the correct functioning of the temperature sensor always approximately half (except for the mode of a defrosting of glasses) that corresponds to average position of the lever.
Ventilation of a back part of salon *
Ventilation of a back part of salon can be carried out by means of the directing deflectors in the average console irrespective of position of the lever on the dashboard. Through them exclusively fresh air arrives.
4, 6 — Rotary switches of temperature for the left and right parties of salon
On scales approximate values of temperature established in salon are specified. The chosen temperature is reached extremely quickly and, as a rule, further should not change (automatic control of temperature).
In order to avoid undesirable jumps of temperature turn switches gradually.
If the rotary switch of temperature on the party of the driver is turned in one of final provisions, then automatic control of temperature both on the party of the driver, and on the right side is switched off. (These provisions can be used as emergency inclusion of heating or cooling in случав not serviceability of electronic system of regulation of temperature).
5 - The switch and the rotary switch of amount of the given air
Situation 0 - the system is switched off, air supply is blocked.
Turn clockwise from the fixed situation - the system is included, the minimum quantity of air arrives, the fan works with the minimum productivity.
Further rotation to the right - amount of the given air increases, the minimum productivity of the fan.
The increased fan productivity - steps 2-4.
For the correct functioning of electronic system of regulation of temperature the rotary switch has to be installed a minimum in a 12 hours position.
For the most intensive heating wind and side glasses it is used:
7 — the Scheme of regulation of the maximum heating of glasses
The maximum effect is reached if the engine is heated-up.
Comfortable traffic conditions - thanks to layer-by-layer distribution of the conditioned air: warm legs - the cold head
Air temperature, given through nozzles on the dashboard and forward doors can change by means of rotation of a roller 1:
rotation to the right - is warmer;
rotation to the left - is colder;
The direction of a stream of air can individually be regulated by deflectors, and its quantity - a roller. Shovels of the deflector located from above on the dashboard are not mobile and ventilation of a middle part of salon through it happens is mediated.
Heating, ventilation and conditioner **
|
|
1-3 — Levers of distribution of the given air
Smooth regulation of distribution of the heated air.
- The lever on the left - it is closed;
- The lever to the right - it is opened completely.
1 — the Lever of distribution of the air given on glasses
The air arriving via deflectors goes to a windshield and forward side glasses.
2 — the Lever of distribution of the air given in the middle
Air supply is regulated by turn of shovels in the middle of the dashboard in forward doors, and also on the top party of the dashboard.
3 — the Lever of distribution of the air given to legs
Air arrives via the deflectors located in a forward and back part of space for legs.
Ventilation of a back part of salon *
Ventilation of a back part of salon can be carried out by means of deflectors of the average console irrespective of position of the lever on the dashboard. Through them exclusively fresh air arrives, and at the switched-on conditioner - cooled.
4, 6 — Rotary switches of temperature for the left and right parties of salon
The mode of regulation of temperature joins and switched off by the rotary switch on the party of the driver. The left final provision - regulation of temperature and heating does not happen.
The turn from the fixed situation to the right - joins the mode of regulation of temperature.
The right final provision (fixed] - the maximum heating of salon, regulation of temperature does not happen (this situation can be used as emergency inclusion in case of malfunction of electronic system of regulation of temperature).
On scales approximate values of the established temperature in salon are specified. The chosen temperature is reached extremely quickly and, as a rule, should not change (automatic control of temperature). In order to avoid undesirable jumps of temperature turn the switch gradually.
5 — the Switch and the rotary switch of amount of the given air
Situation 0 - the system is switched off, air supply is blocked.
Turn clockwise from the fixed situation - the system is included, the minimum quantity of air arrives, the fan works with the minimum productivity.
Further rotation to the right - amount of the given air increases, the minimum productivity of the fan.
The increased fan productivity - steps 2-4.
For the correct functioning of electronic system of regulation of temperature the rotary switch has to be installed a minimum in a 12 hours position.
For the most intensive heating wind and side glasses it is used:
7 — the Scheme of regulation of the maximum obduv of glasses
The maximum effect is reached if the engine is heated-up.
Fogging of glasses happens owing to formation of condensate because of a difference of temperatures or at too high humidity of air. Condensate elimination
it is made only obduvy glasses by a large amount of warm air.
8 — the AUC Switch - Systems of automatic recirculation of air *
|
|
This system distinguishes the most admissible pollution of external air harmful substances and interferes with their receipt in salon. |
By repeated pressing of the switch three functions are activated:
- light-emitting diodes are switched off - the normal mode of intake of fresh air;
- the light-emitting diode lights up at the left - the sensor measures a share of harmful substances in external air; at the increased values of content of harmful substances in external air of the gate of intake of fresh air automatically are closed and the system works in the recirculation mode;
- the right light-emitting diode lights up - the recirculation mode is included.
Systems of recirculation of air
|
|
The mode of recirculation of air is recommended at strongly polluted external air - in salon recirculates internal air that interferes with penetration polluted outside. The burning control lamp signals the serviceable mode of recirculation of air. |
In spite of the fact that for improvement of quality of air (for example, drying) the conditioner is connected automatically, the mode of recirculation of air should not be included for a long time.
|
|
If glasses in the mode of recirculation or in the AUC mode mist over from within, switch to a normal operating mode and press the conditioner switch 9. |
9 — the conditioner Switch
|
|
At the pressed button the conditioner turns on, since прибл. 1 °C of external temperature. The control lamp signals operation of the conditioner. Air is cooled and becomes to the land. |
At very high humidity of air it is recommended to dry air by preliminary turning on of the conditioner (so far the evaporator did not become covered with condensate yet). Glasses in this case do not mist over. At the same time the cooled air should not be brought to a windshield since it can mist over outside. With the maximum refrigerating capacity the system switches automatically to the air recirculation mode (with an insignificant share of fresh air).
10 — the Switch of heating of back glass
|
|
Functioning similarly described on the Heating of Back Glass point. |
Comfortable conditions of the movement - thanks to layer-by-layer distribution of the conditioned air: warm legs - the cold head.
|
|
Air temperature, given via deflectors on the dashboard and forward doors can change by means of rotation of a roller 1:
|
Automatic air conditioning system
|
|
1, 3 — Rollers of regulation of temperature for the left and right side of salon
The mode of regulation of temperature joins and switched off by a roller on the party of the driver.
The left final situation - temperature is not regulated, the given air as much as possible is cooled.
Rotation from the fixed situation to the right - joins regulation of temperature.
The right final provision (fixed) - the maximum heating of salon, regulation of temperature does not happen (this situation can be used for emergency inclusion in case of malfunction of electronic system of regulation of temperature).
On scales approximate values of the established temperatures are specified. The chosen temperature is reached extremely quickly and, as a rule, should not change. Turn the switch gradually, in order to avoid undesirable jumps of temperature.
2 — the Switch and a roller of regulation of amount of the given air
Situation 0 - the system is switched off, air supply is blocked.
Turn to the right before fixing - the system is included, ventilation works with the minimum productivity. Further rotation to the right - amount of the given air increases.
The right final situation (fixed) - the maximum air supply (this situation can be used for emergency inclusion in case of malfunction of electronic system of regulation of temperature).
4, 8 — Keys of inclusion of the automatic mode of distribution of the given air for the right and left parties of salon
|
|
Distribution of air happens automatically depending on temperature conditions. |
Air comes via deflectors of intensive heating wind and forward side glasses via deflectors on the dashboard and in forward doors, and also on the top party of the dashboard, through forward nozzles to space for legs in a forward and back part of salon, and also via deflectors in an end face of the average console for ventilation of a back part of salon.
After cold start-up during bad weather and temperature of a heating element below 30 °C air arrives only via deflectors of intensive heating of glasses.
This program meets almost all requirements imposed to comfortable air conditioning in salon.
For optimum work of system of automatic distribution of air it is not necessary to close all deflectors located on the dashboard.
|
|
Intake of air via all deflectors with shutdown of the mode of automatic distribution of the given air. |
It is recommended to use in hot weather for ventilation and cooling of air in the lower part of salon.
|
|
Press this key, having at the same time increased intensity of operation of the fan and having closed ventilating nozzles for elimination of fogging front and side glasses in case you do not want to press a key. |
|
|
Distribution of the air given to legs in a forward and back part of salon |
Deflectors of heating of glasses are only slightly opened and air to gates at the end of the average console does not arrive.
It is recommended to use in cold weather when ventilation is undesirable, and intensive supply of hot air in legs is necessary.
5 — the AUC Switch - systems of automatic recirculation of air *
|
|
This system distinguishes the most admissible pollution of external air harmful substances and interferes with their receipt in salon. |
By repeated pressing of the switch three functions are activated:
- light-emitting diodes are switched off - the normal mode of intake of fresh air;
- the light-emitting diode lights up at the left - the sensor measures a share of harmful substances in external air; at the increased values of content of harmful substances in external air of the gate snuffled intake of fresh air automatically are closed and the system works in the recirculation mode;
- the right light-emitting diode lights up - the recirculation mode is included.
Systems of recirculation of air
|
|
The mode of recirculation of air is recommended at strongly polluted external air - in salon recirculates internal air that interferes with penetration polluted outside. |
In spite of the fact that for improvement of quality of air (for example, drying) the conditioner is connected automatically, the mode of recirculation of air should not be included for a long time.
|
|
If glasses in the mode of recirculation or in the AUC mode mist over from within, switch to a normal operating mode and press the conditioner switch 9. |
6 — the conditioner Switch
|
|
At the pressed button the conditioner turns on at all operating modes, since прибл. 1 °C of external temperature. Air is cooled and becomes to the land. |
At very high humidity of air it is recommended to dry air by preliminary turning on of the conditioner (so far the evaporator did not become covered with condensate yet), glasses in this case do not mist over. At the same time the cooled air should not be brought to a windshield since it can mist over outside.
With the maximum refrigerating capacity the system switches automatically to the air recirculation mode (with an insignificant share of fresh air), nozzles of heating of glasses are closed.
7 — the Switch of the maximum heating front and side glasses
|
|
Fogging of glasses happens owing to formation of condensate because of a difference of temperatures or too high humidity of air. Elimination of condensate is reached only by heating of glasses a large amount of warm air. |
By pressing this switch the maximum heating front and side glasses is carried out automatically, i.e. in any additional actions there is no need.
The maximum effect is reached only at the heated-up engine.
After unblocking of this switch the former operating mode is automatically restored.
Keep in mind: by the first pressing of the switch of a key after launch of the engine heating of back glass joins.
|
|
Noise after switching off of the engine are caused by the working air gates - they are established in a starting position. |
Comfortable traffic conditions - thanks to layer-by-layer distribution of the conditioned air: warm legs - the cold head.
Driver and passenger of spravayepelniyets
Air temperature, given via deflectors on the dashboard and forward doors can, change by means of rotation of a roller 1:
- rotation to the right - is warmer
- rotation to the left - is colder
Passengers on back seats
Ventilating deflectors at the end of the average console open and adjusted as required. Via these deflectors exclusively fresh air or - arrives at the switched-on conditioner - the cooled air.
Ventilation of a back part of salon is blocked automatically in case of inclusion of ventilation on the party of the driver
- AUTO - (only at cold weather);
- air distribution only through nozzles in space for legs.
Important recommendations about operation of the conditioner:
- The condensate which is formed on the evaporator is taken away under the car; its quantity can make up to 2 liters an hour, depending on humidity of air.
- Preventively the conditioner it is necessary to include for a while a minimum of times a month (in particular in cold season). Otherwise there is a danger of loss of elasticity of sealant of a compression shaft therefore there can be a leak of the cooling substance.
- At all malfunctions of the conditioner - for example, lack of cold air at the included system (an adjusting roller or the rotary switch of temperature on the party of the driver in the left final situation) - switch off it and address on the BMW service.
Microfilter *
Fresh air is sucked in via the microfilter. At the same time flower pollen is filtered for 100%, dust for 60%.
Replacement of the filter is included into volume procedural the robot on maintenance. The lowered air exchange indicates the need of early replacement of the filter.
Internal lighting
Lamps for reading * near internal lighting turn on also.
Automatic system of internal lighting * (in combination with heating of the lock of a door of the driver)
In addition to above-mentioned functions at the locked car internal lighting lights up for several seconds at a pripodnimaniye of the handle of a door of the driver (perhaps at most three times).
If the light was turned on, then internal lighting at switching off of ignition also joins for several seconds.
Lamps for reading in a back part of salon * can turn on, since the moment of turn of a key in the ignition lock in situation 1 by means of the nearby switch.
Dial hours
|
|
The button "" — shift of time clockwise
The button "-" — shift of time counterclockwise |
Press the button - the minute hand will move for one minute ahead.
Hold the button of pressed - the longer the button is pressed, the quicker there is a shift of time in the direction clockwise.
Lighter
|
|
Press. After the spiral will be heated, the lighter will come back automatically to a starting position, it can be taken out. |
|
|
Never touch a heating element of the lighter or its edges; undertake only for the holder. |
Lighter socket
It can be used as a plug nest for a portable lamp, the car vacuum cleaner or etc. to прибл. 200 W at 12 Century.
You watch to damaging the socket the improper plug.
Ashtray
|
|
Ashtray in a forward part of salon
Stick a cigarette in a funnel without pressing, without pressing with a force; before it shake ashes.
Cleaning of an ashtray in a forward part of salon
Extend an ashtray completely, having pressed the spring located under it.
Press ashtray in a back part of salon
Press from above an ashtray, it will move forward automatically.
For cleaning press a spring at an open ashtray and take out it.
The lighter for passengers on back seats * is on the end of the average console.
|
|
The lighter can use at the taken-out ignition key. Therefore do not leave children in the car unguarded. |
Ware box
|
|
— pull opening for the handle. Illumination of a ware box joins from the moment of turn of a key in the ignition lock in situation 1. Closing — slam a cover. |
|
|
In order to avoid danger of a bruise and wounds at sharp braking the ware box during the movement has to be closed. |
Blocking - is possible only the main key.
Replacement of a lamp - wring out the screw-driver the lamp, replace a lamp (5 Watts).
The loaded portable lamp *
The plug nest for the loaded portable lamp is in a ware box at the left. The portable lamp, thanks to the available protection against a recharge can be inserted into a nest constantly.
|
|
Insert a lamp into a plug nest only of switched off. |
Additional ware compartments
Are available on the dashboard, in forward doors, on the average console, it is possible on backs of front seats *, and also in a box * with a cover near a steering column at the left.
Automatic window regulators with the electric drive *
|
|
Join at turn of a key in the ignition lock in situation 2. |
In a back part of salon under windows separate switches are located.
Jog management * - by means of a push of the corresponding switch can open and be closed the driver's window, other windows - only to open.
Blocking switch (shooter)
With its help the manipulation (for example, children) is blocked by automatic sliding glasses of back windows.
Comfortable management of window regulators is also shifted - the lifted hatch with the electric drive
After switching off of ignition it is possible:
- at turn of a key in the ignition lock in situation 0 or
- at the taken-out key, and also
- at the first opening of doors
To close windows or it is shifted - the lifted hatch after closing of doors, hold a key in the door lock in one of two positions of closing until they are not closed (comfortable closing).
|
|
Uncontrolled and inattentive closing of windows can lead to injuries. Therefore do not assume that children played with switches. |
If in the car there are children, watch that the blocking switch (shooter), for prevention of a manipulation by back windows via the corresponding switches located in a back part of salon was pressed.
Leaving the car, surely take out a key from the ignition lock.
Automatic is shifted - the lifted hatch with the electric drive *
Joins at turn of a key in the ignition lock in situation 2.
|
|
|
Management of a push * - opening and closing of the slightly opened hatch is made by means of a switch push in the corresponding direction. At a repeated push of the switch the movement stops.
In order to avoid excessive discharge of air or a draft in salon at opened and especially at the raised hatch during the movement, air nozzles should be held opened and, if necessary, to increase air supply.
At malfunction of the electric drive the hatch can be served manually.
The system is protected from overloads and mechanical hindrances by an automatic safety lock.
Double is shifted - the lifted hatch *
For ventilation it is possible to raise the forward hatch, and also to move both hatches together or separately.
Inclusion at turn of a key in the ignition lock in situation 2.
After switching off of ignition management is possible:
- at turn of a key in the ignition lock in situation 0 or
- at the taken-out key, and also
- at the first opening of doors.
Comfortable closing *
To close windows or it is shifted - the lifted hatch after closing of doors, hold a key in the door lock in one of two positions of closing until they are not closed.
If the key in the lock of ignition is in situation 0, then system after прибл. 15 minutes are disconnected automatically.
Cursor of management *
The automatic movement of hatches happens by means of a nazhimaniye on a switch cursor in the corresponding direction. At a repeated nazhimaniye of the switch, the movement stops.
Move the switch back or shortly press and release - the forward hatch will rise. At completely reopened hatch shortly press and release or move the switch - the forward hatch will move back.
Press the switch or shortly press and release - double it is shifted - the lifted hatch will be closed from any situation.
Move the switch forward or shortly press and release - the forward hatch will rise. At completely reopened forward hatch shortly press and release or move the switch - the back hatch will move forward.
Completely open back hatch connects to forward. By the following pressing of the switch you can shift both hatches in any direction.
When moving in both directions both hatches stop in a position, certain, optimum for ventilation.
Protective functions
In case of danger emergence each movement of the hatch can be interrupted with short pressing the switch.
If when closing one of hatches via the jog switch or the door lock they encounter an obstacle, then closing will be interrupted and the hatch slightly will move in the opposite direction.
In case the switch is pressed more than 10 seconds and the hatch does not move or giving of current was interrupted (for example, the rechargeable battery was disconnected), then the control of the hatch has to be again activated. For this purpose press the switch until the hatch is not closed completely or if it was already closed, press shortly the switch.
In order to avoid excessive discharge of air or a draft in salon at the open and especially raised hatch
during the movement air nozzles should be held opened and, if necessary, to increase air supply.
At malfunction of the electric drive the hatch can be served manually.
The system is protected from overloads and mechanical hindrances by an automatic safety lock.
|
|
When fastening on a luggage carrier roof for skis, for the purpose of providing sufficient the place for lifting of the forward hatch, you watch that ski bindings were fixed in front. |
Mechanical is shifted - the lifted hatch *
In order to avoid excessive discharge of air or a draft in salon at the open and especially raised hatch during the movement air nozzles should be held opened and, if necessary, to increase air supply.
Electric heating of seats *
|
|
The surface and seatbacks can be warmed at turn of a key in the ignition lock in situation 2. |
Press the switch with a heating symbol:
- Intensive heating until the switch shines. Switching to heating happens automatically.
- Heating. As soon as the switch goes out, heating is switched off automatically.
Switching in the heating mode - press the gone-out switch.
Premature shutdown - press the shining switch.
Average armrest of back seats
|
|
If necessary extend for a loop. |
Opening of a ware compartment * on average an armrest - extend upward the button in front under a cover.
Armrests of front seats *
Unblocking - press the button on the face party.
Correction of a tilt angle of light of headlights *
|
|
Passing beam can be regulated depending on loading of the car. The sedan and Touring which are not equipped with system of regulation of a road gleam. |
- 0 = 1 - 2 persons without baggage;
- 1 = 5 people, with baggage or without;
- 2 = 1 person, full luggage carrier.
The sedan equipped with system of regulation of a road gleam:
- 0 = 1 - 2 persons, without baggage;
- 0 = 5 people, with baggage or without;
- 2 = 1 person, full luggage carrier.
Touring equipped with system of regulation of a road gleam, and also BMW 525iX Touring: 0 = 1 - 2 persons, without baggage:
- 0 = 5 people, with baggage or without;
- 1 = 1 person, full luggage carrier.
BMW 52SiX, 530i Touring:
- 0 = 1 - 2 persons, without baggage;
- 1 = 5 people, with baggage or without;
- 1 = 1 person, full luggage carrier.
Do not exceed the most permissible load on a back axis!
Very low provision of passing beam confirms malfunction in system of correction of a tilt angle of a beam of light of headlights.
Automatic antisolar blind of back glass * with the electric drive
|
|
For actuating shortly press the ravnoplechy lever of the switch. |
Mechanical antisolar blind of back glass *
Antisolar blinds of side glasses
Extend a blind for a loop and veil in the holder.
Indication of external temperature and time *
|
|
Along with time, you can cause date and external temperature on the display, and by means of a key of a reminder (Memo) - to include an hourly signal of a sound reminder. |
At turn of a key in the ignition lock in situation 0 and pressing of the corresponding button it is possible to read out time and date. From the moment of turn of a key in the ignition lock in situation 1 there is an indication of time. Numerical data can change or be entered anew.
Input of time and date
After a break in giving of current (the first input, on the display the blinking point) time can be entered, without pressing the UHR key by means of two keys of input h/DAT and min/DAT. For input of date previously press the DATUM key. When pressing keys of input of information or through everyone half a second of their deduction in such situation, the corresponding numerical value increases on one unit.
Function of time is displayed by a symbol of hours, and date - the letters DAT.
For start of hours to within a second press the UHR button, and for start of the program of a calendar - the DATUM key.
After that the point ceases to blink.
Before entering any changed numerical data, press the corresponding key (UHR or DATUM) and hold it in such situation until on indication between hours and minutes or in the afternoon and month there is no blinking point.
If after input of new numerical data you did not start the program, and pressed other key, then old numerical data remain.
Unreal digital data are not accepted by the program. At indication of date leap years are not considered and have to be entered manually.
Recommendations about indication of time in the 12-hour mode
Time symbol in the forenoon (AM) changes on time symbol on midday (RM) after each 12 hours and is specified before its numerical value. As time it is possible to make the following changes for various options of executions:
- 24 h or With
- 12 h or F
- 12 h or Syndication (see buttons on a case cover behind).
After switching with 24 sentry to the 12th hour system there is an automatic change of function of keys of input from the date of and month for month and day.
Function of a sound reminder (Memo)
By means of a key of a reminder of MEMO it is possible to switch on and off an hourly signal of a reminder. A sound whitefish-. the cash is distributed in 15 seconds prior to the expiration of each full hour, and reminds, for example, if the tape recorder that it is necessary to turn on the receiver for listening of the latest news works. ME combination on the display indicates the activated function of a reminder.
External temperature
By pressing the A-TEMP key on the display external temperature is displayed. If external temperature falls below 3 °C, then at the provision of a key in the ignition lock in a position 1, the warning signal is distributed. At the same time on the display within 10 seconds the point and a unit of measure of temperature (C/F) blink.
If at this moment other function is activated, and then temperature is requested again, then in the remained time only the optical warning signal blinks.
The warning signal repeats if from the moment of its last emergence temperature at least once increased to 6 °C and again went down to 3 °C.
The warning signal of low external temperature does not exclude a possibility of ice at temperatures above 3 °C, for example on bridges and the carriageway in a shadow.
Timer * parking heating and parking ventilation
|
|
By means of the timer it is possible to include and turn off directly parking heating and parking ventilation, and also to set time of inclusion from 0.00 to 23.59 hours. |
Direct inclusion - press the EIN button within 3 seconds, the light-emitting diode at the same time blinks.
Switching off - press the AUS button.
Input of time of inclusion - from the moment of turn of a key in the ignition lock in situation 1, the UHR function has to be activated.
By pressing the ZEIT button on the display the symbol of the fan and the alternating figures 1 and 2 specifying respectively on the chosen or entered inclusion time appears.
After the choice of the required figure it is possible to enter appropriate time of inclusion.
You hold the ZEIT button pressed until the point between indication of hours and minutes begins to blink.
Enter the required inclusion time by means of the h/DAT and min/DAT keys.
Again press the button, ZEIT - the point ceases to blink, time of inclusion of ventilation is programmed.
Activation of time of inclusion (from the moment of turn of a key in the ignition lock in situation 1) - after the choice of time of inclusion press the SET/RES button again, the light-emitting diode will shine before automatic inclusion of parking heating and ventilation.
After that the light-emitting diode on the EIN button indicates that the system works.
Deactivation of time of inclusion - after input of time of inclusion press the SET/RES button again, the light-emitting diode will go out.
The set time of inclusion of parking ventilation can constantly be activated and deactivated by repeated pressing of the SET/RES button. Time remains in memory until new is entered.
At the car equipment management of system is made by the on-board computer by means of buttons, ZEIT and SET/RES.
Parking отопление* / Parking ventilation *
Parking heating functions at an external temperature below 16 °C at the key which is taken out from the ignition lock or its turn in situation 0 or 1.
Using a possibility of preliminary inclusion of parking heating in the set time it is possible to sit down in already heated-up salon. Besides, in a frost it will facilitate to you cleaning of the car of snow and ice.
Period of operation of parking heating and ventilation makes 30 minutes. Because of high electricity consumption do not include system two times in a row, without having recharged before it the rechargeable battery on the run.
Usual mode of heating:
- open moderately need all nozzles three levers of distribution of air and forward lattices;
- close nozzles of fresh air on the end of the average console;
- install the rotary switch of amount of the given air in a 12 hours position.
Conditioner
Open moderately need all nozzles three levers of distribution of air and forward lattices. Close nozzles of fresh air on the end of the average console.
Automatic air conditioning system
The warmed-up air arrives automatically through nozzles of heating of glasses in space for legs in front and behind. Regulation of distribution of air by means of buttons is possible only at turn of a key in the ignition lock in situation 1.
Both at the usual mode of heating of the car, and at the switched-on conditioners and the automatic air conditioning system, temperature in salon can be regulated by means of the rotary switch or an adjusting roller of temperature only at turn of a key in the lock of ignition of century situation 1. At situation 0 heating happens most intensively.
Keep in mind - parking heating works still some time after switching off (the light-emitting diode dies away).
Important instructions
If parking heating after at most two attempts of start-up does not join or is automatically turned off, address for council on the BMW service.
Inclusion of parking heating in the enclosed space is categorically forbidden.
During filling surely switch off parking heating!
We recommend - in warm season include for a while parking heating at least once a month (прибл. 5 minutes).
At temperatures over 16 °C arrive as follows: The timer - press the 3rd second the A-TEMP button, the letter E appears.
The on-board computer - press at the same time for 3 seconds the buttons of A-TEMP and ZEIT, the inscription "in" appears. After that parking heating of 1 times (direct inclusion and switching off) can be included.
At an external temperature over 16 °C parking ventilation can be used for an obduv of salon and decrease in temperature in it (provisions of a key in the lock of ignition are similar to provisions of a key at parking heating).
Air is forced by the fan of automatic system of heating or conditioning.
Usual mode of heating
- Open moderately need all nozzles three levers; ventilation through nozzles of intake of fresh air in front or on the end of the average console is most effective;
- install the rotary switch of amount of the given air in a 12 hours position.
Conditioner
Open moderately need of a nozzle; ventilation through forward or back nozzles is most effective.
Automatic air conditioning system
Air arrives automatically through nozzles on the dashboard in the chosen direction and the required quantity. Therefore, for ensuring efficiency of an operating mode of parking ventilation, nozzles have to be completely open.
Automatic control of speed (темпостат)
|
|
The required speed of the movement, since прибл. 40 km/h, can automatically be supported and be set. |
1 — DISPERSAL
Slightly press the lever - the speed of the movement at the time of pressing of the lever remains at the further movement and is remembered. Each subsequent touch to the lever increases speed approximately on 1 km/h.
Press the lever and hold it in this situation - the car accelerates without pressing but an accelerator pedal. Speed of the movement at the time of an otpuskaniye of the lever remains at the further movement and is remembered.
In case the recorded speed was exceeded more than on 10 km/h throughout over 1 minute, then the mode of its maintenance is interrupted and it needs to be activated again.
On BMW 525tds, and also the cars equipped with system of stabilization of adjustment of stability and traction effort (ASC T) * the mode of maintenance of speed is interrupted and has to be restored again after the recorded speed was exceeded on 16 km/h or is underestimated by 8 km/h.
2 — DELAY
Press and hold the lever in this situation - if you moved with the recorded speed, then the car reduces speed owing to automatic reduction of supply of fuel. Speed of the movement at the moment of an otpuskaniye of the lever remains at the further movement and is remembered.
On BMW 525tds, and also the cars equipped with system of automatic control of stability and traction effort (ASC T), the car reduces speed owing to automatic reduction of supply of fuel the Speed of the movement at the moment the otpuskaniya of the lever remains at the further movement and is remembered.
Slightly press the lever - if you already moved with the recorded speed, then each subsequent touch to the lever reduces speed approximately by 1 km/h. On BMW 525tds, and also the cars equipped with system of automatic control of stability and traction effort (ASC T), speed remains and remembered. Each subsequent touch to the lever reduces speed approximately by 1 km/h.
3 — RESTORATION OF THE LAST VALUE OF SPEED
Shortly press the lever from an end face - the speed entered into memory last time is reached again and remains at the movement.
4 — SWITCHING OFF
Slightly press the lever - regulation of speed is turned off irrespective of traffic conditions and a road situation.
Besides, automatic control of speed is turned off automatically at strong delay of the course over 1.5 m / с2 in comparison with set, for example, on rises, during the braking and inclusion of coupling or switching of the lever of the automatic transmission from situation D in situation N.
At a stop
Do not include automatic control of speed if:
|
the engine data on the set speed are extinguished.
Acoustic anticreeping alarm system *
If unauthorized actions continue, attempts of launch of the engine, dismantle of automobile radio become, manipulations with a ware box or the rechargeable battery are conducted, repeatedly for 30 seconds the siren joins.
In attempt to move the car after overcoming short distance the siren is distributed.
Inclusion and switching off of a siren happens along with inclusion and switching off of the anti-theft device via the door lock, or system of remote control.
At the included system in the average console within 36 hours the light-emitting diode burns.
If the light-emitting diode at inclusion of system blinks, then or doors, an engine cowl, a trunk lid, or a ware box are not closed completely. At inclusion of system the light-emitting diode blinks in case one of side glasses openly more than on admissible distance. In case it was not closed, the system takes on protection in 10 seconds everything that is closed completely and the light-emitting diode shines constantly.
At shutdown of system the light-emitting diode dies away. If shutdown happens after the light-emitting diode went out (after 36 hours), then it flashes again for a short time.
In case the alarm system worked, the light-emitting diode blinks within 36 hours and indicates thus perfect attempt of opening of the car or its stealing. It dies away after shutdown of system.
The luggage carrier is available also at the activated system. The light-emitting diode blinking (10 seconds) has to pay your attention that the trunk lid though is closed, but is not blocked (turn a key to the right and take out).
The anticreeping alarm system with additional protection of salon and the sensor working on change of a corner of a bias of the car *
At destruction back or one of side glasses (all side glasses have to be closed, however, for ventilation of salon in hot weather they can remain open on 10 mm) - the siren is distributed. The system reacts as well in case position of the car changes, for example, in attempts of unauthorized dismantle of wheels or an otbuksirovaniya - on change of a corner of a bias of the car the sensor works.
If one of side windows is slightly opened more than at an admissible size, then the light-emitting diode blinks. In case it is not closed, the system takes on protection in 10 seconds all closed windows and the light-emitting diode shines constantly.
For prevention of undesirable operation of the alarm system from the sensor reacting to change of a tilt angle of the car, for example, when transporting by train on the ferry etc., the sensor can be switched off.
Directly after turning on of the anticreeping alarm system repeat once again process of its inclusion (i.e. turn a key in a position of inclusion of anticreeping system again or at remote control - press shortly the button 2).
The light-emitting diode dies away and lights up again. Now the sensor is switched off before the following blackout all alarm systems.
Keep in mind: the wrong installation of loudspeakers in the doorway can negatively influence functioning of the device of protection of windows.
If normal shutdown of system is impossible, then in an emergency case follows will arrive as follows:
- open a door a key (for 30 seconds the siren works);
- get into the car, close a door and turn the ignition key in a position 1 (again, for 30 seconds the siren works);
- wait, the light-emitting diode will not go out yet (after прибл. 15 minutes)
During this time do not open a door; the ignition key remains in a position 1. After that the system is disconnected
On-board computer *
The on-board computer is ready to work at turn of a key in the ignition lock in situation 1.
You make data input for the benefit of safety always prior to the beginning of a trip or at the motionless car.
By pressing the corresponding key of a call of information you can request the following information without preliminary input:
- average speed;
- average fuel consumption on sites of a way 1 and 2;
- external temperature.
Having pressed the corresponding key of a call, pressing the SET/RES (5) key, you can start or stop information again:
- average speed;
- average fuel consumption on sites 1 and 2;
- the timer or, if necessary, 2 terms of inclusion of parking heating / ventilation, and having pressed the UHR key, you can cause or extinguish a signal of a sound hourly reminder of time.
Order of input of numerical data:
- time and date;
- speed limit;
- terms of inclusion of parking heating / ventilation;
- distances to a purpose of visit (what arrival time is calculated on);
- anticreeping protection it is described further.
By means of a key of switching of units of measure (2) each type of information (except a code) after a call can be displayed by its corresponding key for choice in metric or English units.
At interruption in supply of current in a chain, for example, when replacing the rechargeable battery, all data in memory are erased.
At restoration of food it is necessary to enter data on time, date and time of inclusion, distance and speed limit again.
At indication of hindrances of "RRRR" address on the BMW service.
Remote control
|
|
Press shortly the lever of the switch of indexes of turn. |
Information appears in addition in a combination of devices (except for BMW 520i, 525tds - in preparation) and can consistently be requested.
Indication of information the on-board computer goes irrespective of its indication to combinations of devices.
To extinguish indication in a combination of devices press the button of the control and alarm display in combinations of devices or the CODE key.
|
|
Messages of the control and alarm display extinguish the image of data of the on-board computer. |
If you want to obtain all information on a combination of devices, then:
- press the lever of the switch of indexes of turn 3 sec., on the display the inscription Prog 1 will appear (in the on-board computer - P1);
- press the SET/RES key.
If on a combination of devices you want to have a certain selection of information, then in this case:
- press the lever of the switch of indexes of turn 3 sec., on the display the inscription Prog 1 will appear (in the on-board computer - P1);
- press the corresponding key of a call of information.
|
|
At calculation of an average expense on two sites and at installation of terms of inclusion of parking heating / ventilation, follow the following rule. If, for example, both expenses have to be displayed, then the VERBR key needs to be pressed twice. If, however, only the expense on the second, but not on the first site has to be displayed, then after pressing of the VERBR key press a key of switching of units of measure km/mls (by further pressing of a key of switching the expense on the first and second sites is alternately specified). |
For a call affect the display of the first and second terms of inclusion of parking heating / ventilation similarly.
- Press the SET/RES key.
Input and call of information on the on-board computer
Keep in mind! Input is made in the decimal sequence:
|
|
Unreal numerical data are not perceived by system.
At input of new number, the numbers which are in memory are erased: numerical data can be entered in any sequence of decimal categories.
For data recording in memory it is required to press the SET/RES button.
Numerical value increases respectively on unit after each pressing of a key or through everyone half a second at the pressed key.
|
|
Input: press keys in the represented sequence |
Call: Press the next key of a call of necessary information |
|
Time (Date) |
|
|
|
Average fuel consumption on sites 1 or 2 |
|
|
|
Course stock |
— |
|
|
Average speed |
|
|
|
External temperature |
— |
|
|
The timer - start |
|
— |
|
Current time |
— |
|
|
Stop |
|
— |
|
Parking heating / ventilation - Live broadcast |
|
— |
|
Live broadcast |
|
— |
|
Input of time of inclusion 1 or 2 |
|
|
|
The remained distance to a purpose of visit |
DIST
|
DIST |
|
Estimated arrival time
|
ANK |
|
|
Speed limit or limit
|
|
|
|
Code, anticreeping protection:
|
Key in situation 1
|
— |
|
Key in situation 1 or 2
(to enter a code) |
|
|
|
Instruction for input and call |
||
|
Time (Date) |
At indication — UHR (after interruption in supply of current) enter data of time again. Hours after data input can be started to within a second by means of the SET/RES key (for example, on time signal on radio). Input of date is carried out similar to input of time. After pressing of the SET/RES key indication of data of year appears. If necessary, enter new numbers and press once again the SET/RES key. Indication of date can appear otherwise - for this purpose press two times the UHR/DAT key. For correction of time or date change numerical value and then press the SET/RES button. A signal of hour - after the UHR key press the SET/RES key - the symbol of the activated function of a sound signal appears. Before the expiration of each full hour the signal is distributed and in a combination of devices indication of time for a while appears. Switching off - at the activated inquiry of time of UHR press the SET/RES key. A call of time and date at turn of a key in the ignition lock in situation 0 - press the UHR/DAT key. |
||
|
Average fuel consumption on sites 1 or 2 |
After a start of motion when pressing the SET/RES button the computer makes new calculation. By repeated pressing of the VERBR key alternately average expense for the first and second sites is chosen - after short time digital indication of the chosen fuel consumption appears. |
||
|
Course stock |
The plus () before the displayed value means the "full" fuel tank. |
||
|
Average speed |
After a start of motion when pressing the SET/RES button the computer makes new calculation. |
||
|
External temperature |
If external temperature falls below 3 °C, the warning signal is distributed, temperature is displayed automatically and units of measure of temperature blink within 8 seconds; in a combination of devices temperature is displayed. |
||
|
The timer - start |
At cars with parking heating / entilyation function of the timer (stop watch) is absent. At the working timer the light-emitting diode shines. |
||
|
Current time |
The light-emitting diode blinks. Again press the ZEIT key - indication of the working timer will appear. |
||
|
Stop |
Counting of the current time stops if there is other information. It is usually enough to press the SET/RES key. By repeated pressing of the SET/RES key new counting of time is started. By pressing the ZEIT key indication of a condition of parking heating / ventilation appears. Live broadcast in the provision of a key in the ignition lock in a position 1. |
||
|
Parking heating / ventilation - Live broadcast |
|||
|
Live broadcast |
Switching off in situation 0. At the pressed key of inquiry of time press only the SET/RES key. |
||
|
Input of time of inclusion 1 or 2 |
Data input is possible only if hours are included. In the ZEIT mode press once a key, for input of the second term of inclusion press a key once again (the instruction on the display). At the shining light-emitting diode period of operation, parking heating / ventilation can be set for up to 30 minutes, since the start-up moment. In operating time of parking heating / ventilation the light-emitting diode blinks. It dies away at shutdown of system. Correction of time of inclusion is carried out similar to input of information. After input of time of inclusion the 1 or 2 system joins pressing of the SET/RES key. At activation the corresponding light-emitting diode shines. |
||
|
The remained distance to a purpose of visit |
If the entered distance is passed, then further counting goes with a minus sign. |
||
|
Estimated arrival time
|
Estimated arrival time is constantly corrected depending on a way of driving. The call is possible only in case the distance was set in advance. After passing of a distance - when pressing the ANK key data of DIST appear. When switching from a position of any other key appears: — ANK. |
||
|
Speed limit or limit
|
The light-emitting diode shines: at excess of the set speed the sound signal is distributed and the corresponding light-emitting diode blinks, in a combination of devices for a while there is a speed limit put in memory. By repeated pressing of a key of a call of information the warning signal is disconnected, the light-emitting diode dies away, however the value put in memory remains. Input of speed of the movement at the moment - at the pressed LIMIT key press the SET/RES key.
|
||
|
Code, anticreeping protection:
|
Code numbers from 0000 to 9999 can be entered.
The key in the ignition lock in situation 0 - a light-emitting diode shines 36 hours. |
||
|
|
Additional explanations on the on-board computer
(Modification of the information program is possible only after pressing of the corresponding key of a call of information).
|
|
Time and date are caused alternately by repeated pressing of a key. Input of year serves for the accounting of leap-year at indication of date. |
|
|
By means of specific team of start of new calculation average fuel consumption for all trip and for a certain site of a way at the same time can pay off. |
|
|
The estimated stock of the course calculated on the basis of data of a reserve of fuel and taking into account style of driving is induced. If on the display four segments blink, then the stock of the course makes less than 15 km. It is necessary to refuel! The on-board computer registers gas station if the key in the lock of ignition is turned in situation 1 or 0 and more than 5 liters are filled in. The plus () before numerical value indicates that the valid stock of the course is more than India of tsiruyemy value that is a consequence of restriction at measurement of level of fuel. |
|
|
The warning signal repeats if from the moment of final warning temperature at least once increased to 6 °C and again went down to 3 °C. The warning signal does not exclude a possibility of ice at temperatures above 3 °C, for example on bridges and the carriageway in a shadow. |
|
|
Timer: Max, operating time of the timer makes 99 hours and 59 minutes. Time is displayed on the display at first in seconds and the tenth seconds, after one minute in minutes and seconds, after one hour in hours and minutes. |
Parking heating / ventilation: By repeated pressing of this button consistently appear, a condition of system at the moment, time of inclusion 1, time of inclusion 2, repetition etc.
|
|
Speed limit can both be set again, and to be caused. The prevention repeats if speed limit was underestimated once at least by 5 km/h. |
|
|
At the included system under control there are an engine cowl, the radio receiver, a starter. If the cowl is not closed or dismantled the radio receiver, then at turn of a key in the ignition lock in situation About a light-emitting diode blinks during прибл. 10 sec. At the included system turn a key in the lock of ignition in situation 1 or 2 - a signal of a gong and indication - Code mean readiness for input of a code. At inclusion of a starter without input of a code the long gong is distributed and the engine is not started. |
Deactivation in case you forgot code number:
- disconnect the accumulator for 5 minutes;
- turn a key in the ignition lock in situation 1, the siren will work;
- on the display there is an indication of a 15-minute interval of time counted back;
- after 15 minutes the engine can be started.
If you remembered code number, then can enter it at once, without waiting until 15 minutes expire:
- press the CODE key; press the SET/RES key;
- start the engine.
Ski bag *
In a bag reliably it is also accurately possible to transport to three, as much as possible up to four couples of skis.
Length of a bag makes 1.20 m. Taking into account additional space in a luggage carrier skis up to 2.10 m long can keep within. When loading several couples of skis the available place, because of narrowing of a ski bag, decreases therefore only two couples of skis with an identical length of 2.10 m can be transported.
Loading of a ski bag
|
|
Cast away an average armrest of a back seat completely down, undo a "burdock" fastener of cover of dredging above. |
Wring out a little back the lever and take out an average armrest.
|
|
At skim milk installation of an average armrest you watch that ledges of a fixing part entered back guides in dredging. |
|
|
Press the round button - the cover of a loading opening in a luggage carrier is deblocked. |
After that uncouple from above a collar and lay down.
Lay a ski bag between front seats. The fastener "lightning" is intended for the best access to the objects laid in a bag and the best drying-out of a ski bag.
Fix a cover of a loading opening by means of the magnetic holder on the lower side of the shelf of a back.
The request to watch that skis kept within a bag only pure and sharp edges did not spoil surrounding objects.
BMW Touring
Cast away an average armrest of a back seat - do not dismantle it.
Undo a "burdock" fastener of cover of dredging above and put it from above on an armrest.
Press the button down and cast away a cover forward.
Press the button - the cover of loading space is deblocked.
If you plan not to use a ski bag a long time, then before that how to lay, dry it.
It is recommended from time to time, to clear depending on use frequency a waterproof ski bag of thawed snow and condensate.
Operation of the automobile radio receiver *
Quality of reception and reproduction of the radio receiver depends on the place of reception, and also height and guidance of the antenna.
The hindrances caused, for example, by power lines, cars with weak suppression of hindrances or the hindrances which are not equipped with system of suppression at all and also buildings or natural obstacles, at daily operation of the car can cause the noise hindrances which are not giving in to regulation, despite their full suppression in own car.
The atmospheric phenomena, such as, fog, a rain or snowfall, can also prevent radio reception.
With increase in intensity of solar radiation quality of reception on long, average and short waves worsens. The best reception with this wave band is reached at night since at this time working waves are reflected in an ionosphere most strongly.
On wave bands of DV, SV and KB distant reception, t is possible. to a wave extend not only as terrestrial radio waves along the Earth's surface, but also as well as the spatial radio waves reflected from an ionosphere.
For the physical reasons quality of reproduction in the range of average waves not such good, as in the range of very high frequency (VHF). However, the range of average waves, because of good distant reception, especially at night, is used by a large number of transmitters though not to avoid hindrances because of their high concentration.
Unlike VHF range sounding in MB range more muffled.
Range of action of long-wave radio transmitters exceeds range of action of mediumwave.
In the range of short waves the greatest range of action. With the known, caused by the physical reasons restrictions, you will find the greatest number of transmitters and the best sounding in range of 49 meters.
In the range of VHF (FM) *, in comparison with other ranges, the best sounding. However, reception only of a small number of stations, t is possible here. to range of operation of transmitters because of rectilinear distribution of waves makes only 80 km. In process of removal from it there are noise hindrances and in the washed-up account the transmitter will not be heard absolutely or will be forced out by more powerful in which action range you will appear. At emergence of natural hindrances of this sort it is necessary to choose other station.
On VHF necessary is more frequent switching from one radio station to another.
Hissing, crackling, and also sound splashes arise if as a result of buildings - the automobile radio receiver during fractions of a second accepts the same signal of the transmitter two or more time. Also bystry change of loudness is explained by it.
Long hissing appears mostly later how you left an area of coverage of the station or in case of obviously expressed shading zone. Elimination of noise is possible only control for stronger transmitter.
Disappearance of a sound - especially in the range of MB (AM) - occurs owing to imposing of terrestrial and spatial waves in the place of reception and often is followed by reception distortion.
The vibrating hissing arises at shading of direct link from the transmitter to the receiver owing to existence of large structures or natural obstacles.
At movement along the avenue there is a so-called "intaking sound effect".
Automobile radio telephone *
According to the instruction of BMW at additional installation of a radio telephone, for the purpose of providing a reserve of the electric power it is necessary to install the second rechargeable battery of the corresponding capacity with the relay disconnecting it from an electric chain of the car. Experts of the BMW service willingly will consult you on this matter.
Important recommendation:
Application of the mobile communication systems (an automobile radio telephone, radio devices etc.) which are not provided to operation on your car can cause hindrances. BMW is not able to control each product and does not bear therefore any responsibility.
In this regard, before buying similar system, we recommend to address for council on the BMW service.
For ensuring reliable operation of your BMW do not install any mobile phones or other equipment of communication which antenna has to be in salon.
Launch of the engine
- Cock the parking brake; install the lever of gear shifting in neutral situation (on the automatic transmission in situation P or N);
- switch off, whenever possible, everything consumers of current, especially at low temperatures, and you hold squeezed out a coupling pedal;
- DO NOT PRESS THE ACCELERATOR PEDAL
If the engine in the first attempt is not started, for example, in the overcooled or heated-up state - squeeze out a pedal of an accelerator only half.
Have also in a look: start of a starter should not be too short, but also should not exceed 20 seconds. Release the ignition key at once after the beginning of operation of the engine.
Repetition of launch of the engine - turn a key in the ignition lock before repeated start-up in situation 0 or 1, for prevention of inclusion of a starter at even the rotating engine.
Repeat start only after a small pause did not throw a spark plug.
At a hard frost - not to overload the accumulator before new start-up it is recommended to maintain a small pause (прибл. 20 - 30 sec.).
At the cold engine
Hold a key in the lock of ignition in situation 2 until the orange control lamp "time of a prestarting warming up" goes out.
Include a starter until the engine is not started. At especially low temperatures include a starter no more than for 40 seconds.
Pressing a pedal of an accelerator does not exert impact on start-up process.
At the heated-up engine
If the orange control lamp "time of a prestarting warming up" does not light up, start the engine at once.
Removal of air from diesel fuel system
In case of full fuel consumption air from fuel system, as a rule, should not be removed.
If, however, there are difficulties at start-up, then it is necessary to include a starter on прибл. 20 seconds.
Optimum speed is idling determined automatically.
The engine should not be warmed up idling - it is recommended to start at once on average turns.
Engine stop
Turn a key in the lock of ignition in situation 1 or 0.
Economic driving
Fuel consumption depends first of all on style of driving of the car.
- Do not warm up the engine idling, and start at once; avoid at the same time long operation of the engine idling.
- Use the first transfer only for start-off from the place and never disperse on it with "full gas".
- In due time switch speeds and you drive the car on the increased, more economic transfers - the third, fourth or fifth.
- Avoid the long movement with the maximum load.
- Avoid excess weight in the car.
- You watch air pressure in tires.
Besides keep in mind: economic driving reduces harmful emission of the fulfilled gases, and noisiness of the car.
|
|
Never leave the car without supervision with the working engine - it represents big potential danger. |
Running in
During a running in can happen that switching of speeds, management etc. are a little difficult in the beginning. However, as a result extra earnings it is the phenomenon after a while disappears.
Please, observe the following instructions your car served as long as possible, and was the most economic.
Engine and main transfer of the back bridge
To 1000 km of a run
Move with variable turns and variable speed, without exceeding at the same time 140 km/h.
Essentially avoid the maximum supply of fuel ("full gas"), and also ultraboundary pressing an accelerator pedal - so-called provisions "Kick-Down"!
Since 100 km of a run it is possible to raise turns and speed gradually.
If in use the car one of these units is replaced new, then instructions on a running in have to be observed and in this case.
Tires
During a running in coupling of new tires with the road is not optimum yet that is caused by technology of their production. Therefore during the first 300 km the moderate manner of driving is recommended.
Brake system
For achievement of uniform and optimum coefficient of friction at a run of the first 500 km it is necessary to brake mainly on average delay range. At new frictional overlays of brake shoes it is necessary to avoid repeated sharp braking, in particular at high speeds, or long loadings, for example, at the movement through passes.
Frictional overlays of brake shoes and disks are earned extra optimum only after a run of 500 km and under the specified running in conditions.
The parking brake is independent, independent of a foot brake, system with separate brake drums, and has to be earned extra also.
If efficiency of braking considerably decreases, then extra earnings can be made by the driver. If that is allowed by the road, weather and traffic conditions of transport, tighten slightly the lever of the parking brake at a speed прибл. 40 km/h, will not become noticeable resistance yet. After that tighten the lever stronger (move on one tooth of the sector upward) and in this situation move прибл. 400 m. Then again completely release the lever.
Fuel consumption
Fuel consumption is defined according to a standard technique of carrying out tests (DIN 70030/1 part 1). It is not identical at all to average fuel consumption which depends on many factors, such as, style of driving, loading of the car, a condition of the road, intensity of the movement and a transport stream, weather, air pressure in tires and t. fuels on DIN*.
Practical recommendations
Do not warm up the engine idling.
Only at very low external temperatures, for providing full-fledged lubricant, warm up the cold engine on the raised turns of idling about half-minute.
But the cold engine do not develop the high frequency of rotation of a bent shaft since it reduces the term of its service.
At loads of the engine - dispersal, rises - whenever possible move with a frequency of rotation of a bent shaft more than 1500 rpm and you make timely switching to a low gear, in particular on rises.
At coupling switching off completely squeeze out a coupling pedal, at the movement you do not hold a leg on a coupling pedal.
|
|
During the movement you do not hold a leg on a brake pedal. Even easy, but long pressing a pedal of a brake can have the investigation an overheat, wear of brake slips and possible failure of the brake system. |
|
|
After a long trip at low speeds (the movement in the city, in a column) as soon as it becomes possible, several kilometers with a frequency of rotation over 3000 rpm are recommended to pass. Thanks to it possible formation of soot is eliminated. |
|
|
At movement along wet or gryadny roads between tires and a roadbed the water wedge can be formed. This effect known under the name hydroplaning, can cause partial or total loss of contact with a roadbed, loss of control over the car and loss of brake ability of the car. Therefore, on wet roads reduce the speed of the movement. |
The trunk lid at the movement has to be closed the fulfilled gases did not get to salon. However, if because of dimensions of the transported freight it is necessary to move with an open luggage carrier, then it is necessary to close all windows, and also it is shifted - the lifted hatch and to strengthen compulsory ventilation of salon.
|
|
Do not put any heavy or firm objects on the shelf of a back since when braking they can wound passengers. Hang up clothes on hooks so that it did not block the review to the driver. Do not hang up on hooks of heavy objects in order to avoid injuries when braking. |
* DIN - Deutsche Industrie-Norm. Industrial Germany standard (hereinafter).
Engine cowl
|
|
Unblocking - pull the lever located at the left under the dashboard. |
|
|
Prior to carrying out any works in podkapotny space stop and cool the engine. Before beginning works with elektriky, at repair and servicing, especially in podkapotny space, disconnect the rechargeable battery. The inadequate address with details and materials during the work with the car increases risk of injuries. Therefore, observe the corresponding instructions and instructions. If you are not familiar with the safety regulations which are subject to obligatory observance, then charge work to experts of the BMW service. |
|
|
Thanks to the built-in spring mechanism the cowl is automatically pushed forward and it can be opened. |
Illumination of podkapotny space *
|
|
The lamp burns at an open cowl and the included lighting of the car. |
Closing - press a cowl along with both parties before obviously heard click.
Make sure that the cowl is blocked - try to raise it.
|
|
If during the movement you find out that the cowl is not blocked correctly, immediately stop and close it. |
Bolts of fastening of wheels with the lock *
|
|
Mount a bolt with the lock opposite to the gate. |
We recommend to store one key in the tool set enclosed to the car it always was near at hand, for example, in a workshop.
Confidential bolts of fastening of wheels
|
|
1 — the Protective cap (is not established on wheels with a protective cover of bolts) 2 — the Bolt under an adapter 3 — the Adapter (2 pieces in a set of the tool enclosed to the car) |
Dismantle of a wheel
- Turn a protective cap (1) the combined key to the left and remove;
- take out from a tool set (on BMW Touring - under a forward folding cover in a cargo compartment) an adapter (3) and insert into a bolt;
- turn off a bolt (2).
After that remove an adapter and dress a protective cap.
* with a code of an adapter you store the plate in the reliable place.
It is shifted - the lifted hatch
Double is shifted - the lifted hatch
Actions in case of malfunction of electric system:
Closing of the forward hatch - uncover that before a hatch opening, insert a key with an internal hexagon (is in a set of the tool enclosed to the car) in an engine drive hexagon (see an illustration above) and rotate counterclockwise.
Closing of the back hatch - dismantle a cap behind a hatch opening, if necessary act with the screw-driver.
Rotate a key with an internal hexagon only counterclockwise.
|
|
This hatch can only be closed manually, not to open at all, and before it it is necessary to close:
|
When closing both hatches observe the following. Before inserting a key, surely extend the plug located around a hexagon by means of its flat end. After hatches were closed, record it in initial situation.
For elimination of defect address on the BMW service.
Temporary termination of operation of the car
If the car is put on the parking more than for three months, then in order to avoid emergence of any damage charge to experts of the BMW service to carry out the following works:
- To wash up, preserve and in addition to process the engine, podkapotny space, the bottom of a body, axis and units according to factory instructions. To wash up the car outside and to clear salon, after that to process a paint and varnish and chromic covering. To clear rubber a sealant of a cowl and doors, to strew them with talc or to oil glyceric.
- To replace engine oil and an oil filter at the engine heated to working temperature. As additional anticorrosive protection of the engine in fuel rust-preventing agent according to the instruction of the manufacturer can be added.
- To check the level and concentration of cooling liquid and, if necessary, to add.
- To check electrolyte level in accumulators, if necessary to add the distilled water.
- To merge liquid from tanks and pipelines of windscreen washers.
- To completely fill the fuel tank in order to avoid formation of condensate.
- To increase pressure in tires to 4 bars.
How. to put the car on the parking, dry manual and foot parking brakes to avoid corrosion of brake disks and drums.
Put the car on the parking in the dry and well aired room, include a backing (on the automatic transmission - situation P), if necessary enclose persistent wedges under wheels, do not tighten the parking brake!
Dismantle rechargeable batteries, recharge and you store them in the cool and not freezing through room. Not later than in three months recharge batteries, otherwise they will fail!
The conditioner has to turn on for a short time at least once a month (especially in cold season) since differently there is a danger of drying of sealant of a shaft of the compressor therefore the cooling means can flow out.
At the same time the engine should be warmed up to the working temperature (the index of temperature has to be approximately in the middle between two color fields) to avoid internal corrosion. On cars without conditioner the engine during the parking should not be started.
|
|
At start of the engine take care of sufficient ventilation indoors not to inhale the poisonous fulfilled gases. |
If at the same time the car is struck off the register, do not pass the term of repeated registration, otherwise there will be invalid "Permission to operation".
Abroad observe the corresponding administrative instructions!
The beginning of operation after preservation
Recharge rechargeable batteries, if necessary - replace.
Charge to experts of the BMW service to carry out TO-1.
|
|
Parking time during which the rechargeable battery is disconnected is not considered by indication of intervals of maintenance. |
For the purpose of observance of a biennial interval of replacement of brake fluid, this period of time has to be considered surely, replacement of brake fluid needs to be made respectively before the symbol of hours lights up.
Winter operation
Winter months of which changeable weather is characteristic demand for ensuring safe and trouble-free driving not only change of style of driving, but also preparation for them of the car.
At operation in the winter coupling of tires with the road considerably worsens therefore the driver in each situation has to reckon with longer brake way.
Before the onset of cold weather it is expedient to carry out preparation of the car for winter operation on the BMW service.
Observe the corresponding instructions for replacement of oil and do it whenever possible before the onset of cold weather.
For manual and automatic transmissions, the main transfer of the back bridge, hydraulic actuators of steering, the brake system and system of regulation of a road gleam any preparatory activities, except for check of level of oil, are not required.
Serial delivery includes addition cooling liquid of the durable, having anticorrosive properties antifreeze. Concentration, necessary for ensuring anticorrosive protection, has to make 40% during the whole year that corresponds to frost resistance apprx. -27 °C.
Apply only the allowed durable antifreezes which are not containing nitrites and amines. These means are known on the BMW service.
Cooling liquid has to be replaced every two years. Before cold weather and in cold season check frost resistance of cooling liquid. At the same time check the cooling system for tightness and, if necessary, replace the burst and hardened hoses.
Regulation of temperature of the engine via the thermostat happens automatically depending on load of the engine and external temperature. Therefore do not cover a radiator.
Well charged rechargeable battery is a condition of reliable launch of the engine. In cold time its capacity is lower, and load of it is higher, than in the summer.
Apply only the resolved means to leaving * behind locks.
They also prevent their freezing. If, despite all precautionary measures or owing to defect of a heating system of the door lock it freezes, it can be defrozen heated before this key. Do not apply any anti-icers - they promote degreasing and reduce operational reliability of locks.
For prevention of freezing rubber details - a sealant of doors, a cowl and a trunk lid should be processed special means for care of rubber of sealants * or silicone аэрозолью*.
The paint and varnish covering of the car, and also the chromeplated and polished details before the onset of cold weather, and also in winter months have to be preserved corresponding средствами*.
* It is possible to receive on the BMW service.