11.2.2. Removal and installation of the forward stabilizer



  1. Car front also establish to Poddomkratta it on axial support.
  1. If you replace assembly of a rack, give a nut (it is specified by an arrow) fastenings of a bar of the stabilizer to a connecting link (the left side, right same is shown), disconnect a bar link from the rack case.
  1. Give bolts from stabilizer bar arms which fix a bar to a stretcher.
  1. Remove a stabilizer bar from the car. Where it is necessary, give bolts (are specified by shooters) on arms of a bar of the stabilizer and disconnect a bar from a rack arm.


You make installation upside-down. Do not forget to tighten all nuts and bolts with the required effort.