4a6fe675


9.1.2. Removal and installation of the lever of the switch

Removal

 PERFORMANCE ORDER

  1. Establish transmission in position of the reverse gear. Lift a front of the car and establish it on supports. For prevention of an otkatyvaniye do not forget to establish an emphasis under back wheels.
  2. Pull the switch lever button up and take it from the lever.
  3. Remove a frame of the lever and sound-absorbing material under it.
  4. Remove a rubber dustproof cover. On models with the aluminum case of the mechanism of switching before removal of a cover disconnect the socket of the switch of the reverse gear.
  1. Working under the car disconnect the lever of the switch (2) from a rod of the switch (3), having removed a fixing clip (1).
  1. On models with the stamped steel case of the mechanism of switching remove in the top part the switch lever bearing a lock ring and take the lever.
  1. On models with the aluminum case of the mechanism of switching from under the lower bearing of the lever of switching insert two screw-drivers into grooves of a lock ring of the bearing. For a rasstoporeniye of a ring turn it on a quarter of a turn counterclockwise and take the switch lever.

Installation

Installation back to the procedure of removal.