4a6fe675


13.7. Removal, installation and adjustment of a latch, cylinder of the lock and handles of a door

Standard details of a latch of a door, cylinder of the lock and handle of a door.

Remove the panel (panels) of a covering and a plastic sealant of a door (see the Section Removal and installation of the panel of an internal covering of doors).

Latch

 PERFORMANCE ORDER

  1. Disconnect all drafts from a latch.
  2. Give fixing screws of a latch.
  3. Disconnect assembly of a latch and remove it.
  4. You make installation upside-down.

Lock cylinder

 PERFORMANCE ORDER

  1. Disconnect the drive.
  2. By means of the screw-driver remove a fixing clip and pull out the lock cylinder.
  3. You make installation upside-down.

Internal handle of a door

 PERFORMANCE ORDER

  1. Disconnect driving draft from the handle.
  2. Give fixing screws and remove the handle from a door.
  3. You make installation upside-down.

External handle of a door

 PERFORMANCE ORDER

  1. Lift the handle up to provide access, give two fixing screws, then remove the handle from a door.
  2. You make installation upside-down