4a6fe675

2.1.14. Removal and installation of a flywheel / driving disk

 PERFORMANCE ORDER

  1. Remove transmission (for cars with manual transmission see the Head the Manual Box of Gear Shifting (MBGS); for cars with automatic transmission see the Head the Automatic Transmission (AT)).
  2. On cars with manual transmission remove coupling (see the Head Stsepleniye).
  3. Where it is necessary, mark the provision of a flywheel / a driving disk in relation to a bent shaft subsequently to establish it in the same situation.
  4. The flywheel / a driving disk fastens to a back part of a bent shaft by means of eight bolts.
  1. By means of a replaceable head and the ratchet mechanism give eight bolts of fastening of a flywheel / a driving disk to a crankshaft flange - hold a flywheel / a driving disk from a provorachivaniye, having blocked a gear wreath the lever
  1. Be careful - a flywheel quite heavy.
  2. For installation of a flywheel / a driving disk on a bent shaft apply on bolts special sealant for a carving and tighten them gradually, moving on diagonals, to the required effort.
  3. Carry out the rest of the procedure of installation as it should be, the return to removal.